https://community.extremenetworks.com/t5/extremecloud-iq-site-engine/viewing-lldp-remote-system-name-in-interface-flexview/m-p/18064#M645 Hello Ed,<BR /> <BR /> You can try adding lldpRemSysName=1.0.8802.1.1.2.1.4.1.1.9 to the LLDP Port Information FlexView. This flexview already provides the local and remote ports information but is missing the remote sysname. Mon, 16 May 2016 22:51:00 GMT Bob_Maheu 2016-05-16T22:51:00Z https://community.extremenetworks.com/t5/extremecloud-iq-site-engine/viewing-lldp-remote-system-name-in-interface-flexview/m-p/18063#M644 I'm trying to create a flexview to view the sysname of devices connected to a port on an Extreme X450. I've found the LLDP Remote Systems view but this doesn't show the local port is there a way to correlate this information? Basically I'm trying to get a list of ports with connected WAP (3825) names rather than MAC addresses. Regards, Ed. Mon, 25 Apr 2016 21:50:00 GMT https://community.extremenetworks.com/t5/extremecloud-iq-site-engine/viewing-lldp-remote-system-name-in-interface-flexview/m-p/18063#M644 Ed_Mannion 2016-04-25T21:50:00Z https://community.extremenetworks.com/t5/extremecloud-iq-site-engine/viewing-lldp-remote-system-name-in-interface-flexview/m-p/18064#M645 Hello Ed,<BR /> <BR /> You can try adding lldpRemSysName=1.0.8802.1.1.2.1.4.1.1.9 to the LLDP Port Information FlexView. This flexview already provides the local and remote ports information but is missing the remote sysname. Mon, 16 May 2016 22:51:00 GMT https://community.extremenetworks.com/t5/extremecloud-iq-site-engine/viewing-lldp-remote-system-name-in-interface-flexview/m-p/18064#M645 Bob_Maheu 2016-05-16T22:51:00Z