https://community.extremenetworks.com/t5/extremecloud-iq-site-engine/purview-10-gb-interface-activation/m-p/46622#M6461 Keith, can you check the /etc/network/interfaces file on the Purview appliance before and after enforce?<BR /> <BR /> Also can you check the /opt/appid/conf/adppidconfig.xml file before and after enforce?<BR /> <BR /> Also looking at the usr/postinstall/dnetconfig.properties pre and post enforce so we are certain what is changing. Tue, 22 Nov 2016 21:08:00 GMT Mike_Thomas 2016-11-22T21:08:00Z https://community.extremenetworks.com/t5/extremecloud-iq-site-engine/purview-10-gb-interface-activation/m-p/46621#M6460 I am bringing up a purview appliance with mirrored interfaces to monitor my 2 wireless controllers, and my wired network. I am using 2 of the built-in purview appliance interfaces for the mirror to the wireless controllers, and I have installed the PV-A-300-10G-UG I/O module for a 10G link to my S6 to monitor mirrored ports in my network.<BR /> <BR /> I have re-run dnetconfig to try to activate the 10 G port, but it seems like at the most I can only get 2 monitoring interfaces to be active at a time. In the Purview deployment guide it mentions editing /etc/network/interfaces to add additional interfaces, but this file clearly indicates that it should not be edited (see below)<BR /> <BR /> Am I missing something? Is there a better way to bring up the 10 G interface?<BR /> <BR /> <BLOCKQUOTE>##################################################################### WARNING: This file is automatically generated on every enforce. <BR /> # Any modifications made to this file will be lost.<BR /> ####################################################################</BLOCKQUOTE> Tue, 22 Nov 2016 19:58:00 GMT https://community.extremenetworks.com/t5/extremecloud-iq-site-engine/purview-10-gb-interface-activation/m-p/46621#M6460 Keith_Obermeier 2016-11-22T19:58:00Z https://community.extremenetworks.com/t5/extremecloud-iq-site-engine/purview-10-gb-interface-activation/m-p/46622#M6461 Keith, can you check the /etc/network/interfaces file on the Purview appliance before and after enforce?<BR /> <BR /> Also can you check the /opt/appid/conf/adppidconfig.xml file before and after enforce?<BR /> <BR /> Also looking at the usr/postinstall/dnetconfig.properties pre and post enforce so we are certain what is changing. Tue, 22 Nov 2016 21:08:00 GMT https://community.extremenetworks.com/t5/extremecloud-iq-site-engine/purview-10-gb-interface-activation/m-p/46622#M6461 Mike_Thomas 2016-11-22T21:08:00Z