topic RE: Create a Dynamic Group of port based on Access Vlan on Netsight in ExtremeCloud IQ- Site Engine Management Center

Create a Dynamic Group of port based on Access Vlan on Netsight

_up__bb_ — Mon, 22 Jun 2015 21:56:00 GMT

I need to catch all the port assigned to a particolar vlan on the entire network.
We need to create a Group of Port based on the port configured as untag on this vlan.
The Switch are all XOS, and the port may change vlan direct from the customer, so it would be great this group are dynamic.

Once grouped I would be able to create a script or flax view to monitor and manage this port.
Is possible?

Best Regards
Roberto

RE: Create a Dynamic Group of port based on Access Vlan on Netsight

Hernandez__Josh — Tue, 07 Jul 2015 23:26:00 GMT

Roberto,

I need to ask a couple of questions for clarification:

1. Are you already aware of the ports you want grouped?
2. If so, are you wanting direction on how to create this group?
3. If no, are you wanting direction on how to poll the switches and dynamically add ports to a specific group based on tag status?

Thanks

RE: Create a Dynamic Group of port based on Access Vlan on Netsight

_up__bb_ — Wed, 08 Jul 2015 12:04:00 GMT

Hi Hernandez,

1. We know the vlan we are intrested to (vlan pippo, vlan pluto) we want to group all the untagged port for these vlan on all the switched.
2. We must create a group for each vlan that contain all the untagged port, and this group must be updated automatically when the customer add or remove port from the vlan.
On these group of ports we must create a flex view to check some information.

Thanks
Roberto

RE: Create a Dynamic Group of port based on Access Vlan on Netsight

Hernandez__Josh — Wed, 08 Jul 2015 20:12:00 GMT

Roberto,

Thank you for the response. I will research this further and provide an update as soon as possible.

RE: Create a Dynamic Group of port based on Access Vlan on Netsight

_up__bb_ — Mon, 30 May 2016 18:45:00 GMT

Hi Joshua

have you found something useful?

RE: Create a Dynamic Group of port based on Access Vlan on Netsight

Hernandez__Josh — Tue, 31 May 2016 21:57:00 GMT

Roberto,

After researching this, there is no way to dynamically update a port group.