https://community.extremenetworks.com/t5/extremecloud-iq-site-engine/access-point-in-netsight-topology-map/m-p/48321#M6822 Is there a way to discover the Access-Points and display the right connection to the Switchport in the Netsight Topology map automatically?<BR /> It is nice to see the Access-Points as the port of the controller,<BR /> but it would be nicer to see the physical connetion of the access-point in the topology map,<BR /> even if this circumstance costs a device-license .<BR /> Mon, 06 Jun 2016 12:57:00 GMT Peter_Ruester 2016-06-06T12:57:00Z https://community.extremenetworks.com/t5/extremecloud-iq-site-engine/access-point-in-netsight-topology-map/m-p/48321#M6822 Is there a way to discover the Access-Points and display the right connection to the Switchport in the Netsight Topology map automatically?<BR /> It is nice to see the Access-Points as the port of the controller,<BR /> but it would be nicer to see the physical connetion of the access-point in the topology map,<BR /> even if this circumstance costs a device-license .<BR /> Mon, 06 Jun 2016 12:57:00 GMT https://community.extremenetworks.com/t5/extremecloud-iq-site-engine/access-point-in-netsight-topology-map/m-p/48321#M6822 Peter_Ruester 2016-06-06T12:57:00Z https://community.extremenetworks.com/t5/extremecloud-iq-site-engine/access-point-in-netsight-topology-map/m-p/48322#M6823 Hi, you can display this information only when enabling mac authentication on the port. when the ap is authenticated netsight can view the port on which the ap is connected to. Phil Mon, 06 Jun 2016 15:16:00 GMT https://community.extremenetworks.com/t5/extremecloud-iq-site-engine/access-point-in-netsight-topology-map/m-p/48322#M6823 Philipp_Josten 2016-06-06T15:16:00Z