https://community.extremenetworks.com/t5/extremecloud-iq-site-engine/cisco-device-integration/m-p/48343#M6827 Also wanted to point out, I am able to run the Cisco Flex view in the Java application to pull the vlans that way but it would be helpful to my team if they would show up in EMC that is much easier for them to learn to navigate. Fri, 07 Jul 2017 05:21:00 GMT daniel_griffis 2017-07-07T05:21:00Z https://community.extremenetworks.com/t5/extremecloud-iq-site-engine/cisco-device-integration/m-p/48340#M6824 i am trying to integrate 189 cisco devices into Device Manager and NAC. We have been pushing out 802.1x through wireless but now are about to start the wired network. I have successfully tested 802.1x with a test switch. We have all the cisco devices in Device Manager but with limited info available. We can see the ports and doing weekly firmware backups on all devices but are unable to monitor anything outside of ports and are not showing Vlans configured on ports. We have also tried many times to use the Firmware Upgrade with no luck. Any help you can provide would be great.<BR /> Thu, 06 Jul 2017 10:04:00 GMT https://community.extremenetworks.com/t5/extremecloud-iq-site-engine/cisco-device-integration/m-p/48340#M6824 daniel_griffis 2017-07-06T10:04:00Z https://community.extremenetworks.com/t5/extremecloud-iq-site-engine/cisco-device-integration/m-p/48341#M6825 For a start.... What EMC version is installed, what Cisco model and version and post the SNMP Config of the switch. Thu, 06 Jul 2017 11:58:00 GMT https://community.extremenetworks.com/t5/extremecloud-iq-site-engine/cisco-device-integration/m-p/48341#M6825 Ronald_Dvorak 2017-07-06T11:58:00Z https://community.extremenetworks.com/t5/extremecloud-iq-site-engine/cisco-device-integration/m-p/48342#M6826 We are running 7.1.1.9, our network is comprised of mostly Cisco 2960S and 2960X switches and a few other models. Our cores are Cisco 4507, and routers are 2900 series and 4300 series. This is my latest snmp setup that I have most recently tried. This is quite long but I have tried many different angels to snmp trying to make it work with EMC.<BR /> logging host 10.2.13.37<BR /> !<BR /> snmp-server group v3 v3 priv<BR /> snmp-server group S3curegrp v3 priv<BR /> snmp-server community S3cure RO<BR /> snmp-server location DCO Office/IT Office<BR /> snmp-server enable traps snmp authentication linkdown linkup coldstart warmstart<BR /> snmp-server enable traps transceiver all<BR /> snmp-server enable traps call-home message-send-fail server-fail<BR /> snmp-server enable traps tty<BR /> snmp-server enable traps license<BR /> snmp-server enable traps auth-framework sec-violation<BR /> snmp-server enable traps cluster<BR /> snmp-server enable traps config-copy<BR /> snmp-server enable traps config<BR /> snmp-server enable traps config-ctid<BR /> snmp-server enable traps trustsec-sxp conn-srcaddr-err msg-parse-err conn-config-err binding-err conn-up conn-down binding-expn-fail oper-nodeid-change binding-conflict<BR /> snmp-server enable traps energywise<BR /> snmp-server enable traps fru-ctrl<BR /> snmp-server enable traps entity<BR /> snmp-server enable traps event-manager<BR /> snmp-server enable traps ike policy add<BR /> snmp-server enable traps ike policy delete<BR /> snmp-server enable traps ike tunnel start<BR /> snmp-server enable traps ike tunnel stop<BR /> snmp-server enable traps ipsec cryptomap add<BR /> snmp-server enable traps ipsec cryptomap delete<BR /> snmp-server enable traps ipsec cryptomap attach<BR /> snmp-server enable traps ipsec cryptomap detach<BR /> snmp-server enable traps ipsec tunnel start<BR /> snmp-server enable traps ipsec tunnel stop<BR /> snmp-server enable traps ipsec too-many-sas<BR /> snmp-server enable traps power-ethernet group 1<BR /> snmp-server enable traps power-ethernet police<BR /> snmp-server enable traps cpu threshold<BR /> snmp-server enable traps vstack<BR /> snmp-server enable traps bridge newroot topologychange<BR /> snmp-server enable traps stpx inconsistency root-inconsistency loop-inconsistency<BR /> snmp-server enable traps syslog<BR /> snmp-server enable traps vtp<BR /> snmp-server enable traps vlancreate<BR /> snmp-server enable traps vlandelete<BR /> snmp-server enable traps flash insertion removal<BR /> snmp-server enable traps port-security<BR /> snmp-server enable traps envmon fan shutdown supply temperature status<BR /> snmp-server enable traps stackwise<BR /> snmp-server enable traps bulkstat collection transfer<BR /> snmp-server enable traps errdisable<BR /> snmp-server enable traps mac-notification change move threshold<BR /> snmp-server enable traps vlan-membership<BR /> snmp-server host 10.2.13.37 version 3 priv v3<BR /> <BR /> Fri, 07 Jul 2017 05:18:00 GMT https://community.extremenetworks.com/t5/extremecloud-iq-site-engine/cisco-device-integration/m-p/48342#M6826 daniel_griffis 2017-07-07T05:18:00Z https://community.extremenetworks.com/t5/extremecloud-iq-site-engine/cisco-device-integration/m-p/48343#M6827 Also wanted to point out, I am able to run the Cisco Flex view in the Java application to pull the vlans that way but it would be helpful to my team if they would show up in EMC that is much easier for them to learn to navigate. Fri, 07 Jul 2017 05:21:00 GMT https://community.extremenetworks.com/t5/extremecloud-iq-site-engine/cisco-device-integration/m-p/48343#M6827 daniel_griffis 2017-07-07T05:21:00Z https://community.extremenetworks.com/t5/extremecloud-iq-site-engine/cisco-device-integration/m-p/48344#M6828 I have a concern, you can share what configuration of snmp and syslog applied on Cisco computers both Switches, Router and Controllers and Access Point on EMC.<BR /> <BR /> I would also like to know if I can register any controller in EMC and be able to have control of the APs, statistics of users registration by SSID and connections in general?<BR /> <BR /> I appreciate your collaboration.<BR /> Fri, 29 Sep 2017 19:02:00 GMT https://community.extremenetworks.com/t5/extremecloud-iq-site-engine/cisco-device-integration/m-p/48344#M6828 Jairo_Rojas_Her 2017-09-29T19:02:00Z