topic Port Default Policy Role between Console and Policy Mngr is out-of-sync in ExtremeCloud IQ- Site Engine Management Center

Port Default Policy Role between Console and Policy Mngr is out-of-sync

Walt_Witkowski — Tue, 29 Apr 2014 00:00:00 GMT

Why would Console and Policy Mngr differ when viewing the default port policy role that is being applied. Policy Mngr is showing in one case 20 ports with a specific role and Console only shows the role on 10 of those ports

RE: Port Default Policy Role between Console and Policy Mngr is out-of-sync

Zdeněk_Pala — Thu, 01 May 2014 19:59:00 GMT

are all those ports the same king (physical). In PM there is option to show also virtual ports = LAG.

It should read the same OID from the mib, the data should be the same. Can you share the screenshot?

Z.

RE: Port Default Policy Role between Console and Policy Mngr is out-of-sync

Walt_Witkowski — Thu, 01 May 2014 19:59:00 GMT

Enterasys has confirmed that they are aware of this issue. I am running Netsight 5.1 and Netsight ver.6.1 is in the works with a fix. Screen shots are available in the case 01021283. Clarification... When viewing Netsight Console the "BasicPolicy" tab all the ports set to have a specific default role do not show the role, under the "Default Role" column. If I SSH to the switch (C3) and do a "show config policy" the "set policy port xx.x x is there for every port intended. The Netsight Policy Mngr. also shows all the intended ports for the role when I select a role and under the "ports" tab do a retrieve operation.