topic RE: No Endsystem Informations in NetSight NAC Manager in ExtremeCloud IQ- Site Engine Management Center

No Endsystem Informations in NetSight NAC Manager

Hans2 — Wed, 06 Sep 2017 20:05:00 GMT

We have two NAC Apliances installed and added the Switches (extreme X450 G2) to the NetSight NAC Manager. SNMPv3 ist working and the switch detail Informations are displayed in the overview of the NAC Manager in Chapter "switches". The Problem ist, that we don´t get any Informations of the "End-Systems". I think I hve forgotten to configure anything but I don´t know what.

RE: No Endsystem Informations in NetSight NAC Manager

Ryan_Yacobucci — Wed, 06 Sep 2017 20:32:00 GMT

Hello,

Have you configured the switch for MAC or 802.1x authentication?

Adding the switch to NAC will push RADIUS configurations, but not enable authentication.

https://gtacknowledge.extremenetworks.com/articles/How_To/How-to-configure-netlogin-dot1x-via-policy...
https://gtacknowledge.extremenetworks.com/articles/How_To/How-to-configure-Mac-based-Netlogin-with-R...

Thanks
-Ryan

RE: No Endsystem Informations in NetSight NAC Manager

Hans2 — Thu, 07 Sep 2017 18:40:00 GMT

Yes, you are right... I see my problem...
Thank you Ryan for your tip and the links.

RE: No Endsystem Informations in NetSight NAC Manager

M_Nees — Fri, 08 Sep 2017 20:25:00 GMT

Hi,

i recommend you EXOS V22.3 on X450-G2 - node-alias is a very nice feature in conjungtion with authentication. Also other bugs and issues are fixed in compare to previous Version.

Regards

RE: No Endsystem Informations in NetSight NAC Manager

Bin — Mon, 11 Sep 2017 05:12:00 GMT

Hi,

Add the article for 802.1x authentication on EXOS

How to configure 802.1x based Netlogin with Radius on EXOS
https://gtacknowledge.extremenetworks.com/articles/How_To/How-to-configure-802-1x-based-Netlogin-wit...