topic RE: Access Point not detected in netsight in ExtremeCloud IQ- Site Engine Management Center

Access Point not detected in netsight

Ashish_Sahu — Mon, 21 Sep 2015 11:51:00 GMT

Access Point not detected in netsight but controller and my other devices are

detected.
please help me how to configure in netsight

RE: Access Point not detected in netsight

Ronald_Dvorak — Mon, 21 Sep 2015 12:40:00 GMT

Was it working before and now it shows 0 or is that a new installation?

Could you check whether you've configured all required steps, here a post to my notes...
https://community.extremenetworks.com/extreme/topics/using_netsight_5_to_manage_wireless_controllers

I'm not sure how OneView get's that information it could be via the controller CLI - so make sure that the CLI credentials are correct.

-Ron

RE: Access Point not detected in netsight

Ashish_Sahu — Mon, 21 Sep 2015 12:49:00 GMT

YES ,NEW INSTALLATIONS

RE: Access Point not detected in netsight

Ashish_Sahu — Mon, 21 Sep 2015 14:25:00 GMT

Hello Sir
my issue not controller, controller is detected ap not detected

RE: Access Point not detected in netsight

Ronald_Dvorak — Mon, 21 Sep 2015 15:16:00 GMT

The controller is managed via Netsight Console BUT as the APs are not real devices (at least not in Netsight Console) you'd need to configure CLI access from Netsight to the controller.

Netsight will ssh to the controller to pull the AP status information.
I've tried it in my lab, if I use a wrong password in my CLI profile OneView will not show the AP status/count.

So follow the instructions to make sure Netsight could access the controller via ssh..
https://community.extremenetworks.com/extreme/topics/using_netsight_5_to_manage_wireless_controllers

-Ron

RE: Access Point not detected in netsight

Doug — Mon, 21 Sep 2015 23:28:00 GMT

Reference: https://gtacknowledge.extremenetworks.com/articles/Solution/OneView-displays-SYNC-ERROR-CLI-AUTHENTI...

RE: Access Point not detected in netsight

Ashish_Sahu — Wed, 23 Sep 2015 13:46:00 GMT

thanks