topic RE: Share your custom Flexviews with the community in ExtremeCloud IQ- Site Engine Management Center

Share your custom Flexviews with the community

Stephen_Jarbeck — Tue, 29 Oct 2013 01:01:00 GMT

I have created a few custom Flexviews and find these really valuable. For example one custom Flexview queries my APC UPS and reports power consumption, battery life, and estimated run time. I'm sure others in the community have created their own custom Flexviews. My suggestion would be to allow users to upload their custom flexviews and share these with the community. This will help novices and veterans alike by giving them another resource to quickly expand the functionality of Netsight. If this idea takes off I would also recommend that within Netsight there is an easy import tool of Flexviews. (There might already be but I haven't found it. Currently I copy these from the directory itself.) Let me know what you think.

RE: Share your custom Flexviews with the community

Jason_Parker — Tue, 29 Oct 2013 06:40:00 GMT

Stephen, That is a great idea. I have saved a number of these over the years with assistance with Bob Maheu. If this site is created then I would share my Flexviews to the space available. I can also share them now if needed such as emailing them through our SecureFTP site Jason

RE: Share your custom Flexviews with the community

Jason_Parker — Tue, 29 Oct 2013 06:40:00 GMT

Please see the folder "Documents Referenced in Topic Replies" for over 70 or so Flexviews that I asked Dan Makros to post Please enjoy Jason

RE: Share your custom Flexviews with the community

Simon_Read — Tue, 29 Oct 2013 06:40:00 GMT

Hi Jason, Perhaps the excitement or just being new to, "The Hub", today , but I can't find the, "Documents Referenced in Topic Replies", you mentioned.

RE: Share your custom Flexviews with the community

Jason_Parker — Tue, 29 Oct 2013 06:40:00 GMT

HTTPS://Enterasys.box.com and select "Documents referenced in topic replies" That should work for you I am new at this too 

RE: Share your custom Flexviews with the community

Simon_Read — Tue, 29 Oct 2013 06:40:00 GMT

Hi Jason, I've created a Box account, but the link above just jumps to my account. Do you still need to share it or invite me to collaborate?

RE: Share your custom Flexviews with the community

Zdeněk_Pala — Tue, 29 Oct 2013 06:40:00 GMT

If you can invite me also please It would be great. thx. Z.

RE: Share your custom Flexviews with the community

Jason_Parker — Tue, 29 Oct 2013 06:40:00 GMT

Give this a try: https://enterasys.app.box.com/files/0/f/1268600292/Documents_Referenced_in_Topic_Replies

RE: Share your custom Flexviews with the community

Jason_Parker — Tue, 29 Oct 2013 06:40:00 GMT

I made a mistake. I need to create a link to each flexview. I am working on it. Learning in progress for me 

RE: Share your custom Flexviews with the community

Jason_Parker — Tue, 29 Oct 2013 06:40:00 GMT

Here are a few of them Spanguard_enable https://enterasys.box.com/s/39164qhv0o93d091jsjl Spanguard Settings https://enterasys.box.com/s/1ha6faxgb3kxndeqj9j1 X-Pedition Hardware Details https://enterasys.box.com/s/a8e4pslr1aexzyz0mns2 Trap Table https://enterasys.box.com/s/vnkevkkh07mrbvjmput5 TopN Control Table https://enterasys.box.com/s/u3lu43e1k3lhkni758sc Storage Utilization https://enterasys.box.com/s/7x37ztr1maabi87bro9m VPN Tunnel Information https://enterasys.box.com/s/dz8si8nijnosidq35xcc Wireless_Autochannel https://enterasys.box.com/s/7hopr13r8kbsf64jm1ak Wireless Firmware upgrade https://enterasys.box.com/s/nrfj2lt1uvhhpcr28ki8 Wireless Radio Security https://enterasys.box.com/s/7tvh19iwx6q4sund7fw5 Wireless Security https://enterasys.box.com/s/nziu6jsbt0e95zzc0qit TFTP Download Management https://enterasys.box.com/s/wsti0duj0u62vshq3cbp Timed Reset Status https://enterasys.box.com/s/i8a4manhm5ovkcf0blzv SNTP Server https://enterasys.box.com/s/mboq2iy7dthmr5yh5me3

RE: Share your custom Flexviews with the community

Jason_Parker — Tue, 29 Oct 2013 06:40:00 GMT

SNTP Client Unicast https://enterasys.box.com/s/2471omwvn5m5lnlt7lop sntp_client_setup https://enterasys.box.com/s/0d6u9uietb8a8b6ndw8x SNTP Client Unicast Server https://enterasys.box.com/s/7iqafjemld3ru4wdsmdh SNTP Server https://enterasys.box.com/s/mboq2iy7dthmr5yh5me3 SNTP Broadcast https://enterasys.box.com/s/az4fh6mumk8z8exglouf Time Difference https://enterasys.box.com/s/r16wjthqkeysmvahswpe sysuptimelastchange https://enterasys.box.com/s/9km13yem5gaqi3zxchmj Syslog Summary Information https://enterasys.box.com/s/p52wtwjfag3zsjx212to Syslog Server Configuration https://enterasys.box.com/s/2q2i15e1o4h63kohfik9 Switch Information https://enterasys.box.com/s/f0ntrt8mo9eih8zt0m93 RMON2 Protocol Distribution Statistics https://enterasys.box.com/s/o4xnutuk433yzi8jt7jq RMON2 Protocol Directory https://enterasys.box.com/s/et2gcug0x9v2qimynace RMON2 Address Map Control https://enterasys.box.com/s/e5733c8zxdct2hbyjdju SNMPtrapd https://enterasys.box.com/s/ogyoqu7n88nflo44x1g8

RE: Share your custom Flexviews with the community

Tamera_Rousseau — Tue, 29 Oct 2013 18:20:00 GMT

Stephen, this is a great idea! If you would like to share Flexviews within the community, any file sharing application (Box, Dropbox, etc) can be embedded into a reply. All that is required is to make sure what you are sharing is a public document and then the community can benefit from this. If you would like to share your in this fashion, please feel free to do so in this topic!

I am not entirely sure about sharing them in Netsight. I will share this idea with our Product Management team and they will update. Thank you!

RE: Share your custom Flexviews with the community

Zdeněk_Pala — Thu, 31 Oct 2013 19:08:00 GMT

Hi, here are some for UPS from APC company: - https://enterasys.box.com/s/i2dqzsvfrnlma70obo4a - https://enterasys.box.com/s/n3tww8jf6ok4dhmjs4a9 - https://enterasys.box.com/s/bwqhq3cdk03znodp18d0 - https://enterasys.box.com/s/yox2syczgelpj94b7wx1 - https://enterasys.box.com/s/sfkuv77g50omtm2syywy - https://enterasys.box.com/s/gqfob1dwkcw5o4cy0um3 necessary MIBs should be already in NetSight good luck!

RE: Share your custom Flexviews with the community

Zdeněk_Pala — Thu, 31 Oct 2013 19:25:00 GMT

Hi, here are some flexviews for Catalyst switches: Authentication settings - https://enterasys.box.com/s/fje62awasztbua8ahrti Configuration - https://enterasys.box.com/s/rglz2tjdb3luwoeli7cd Cisco DP - https://enterasys.box.com/s/0mtlov5idzy0swf68ldr PVID - https://enterasys.box.com/s/gylcwnn9njgytwgikbcn PVST - https://enterasys.box.com/s/372nrhcxb6djpmueajbn STP - https://enterasys.box.com/s/zll3anx4xx0f15psdtv0 VLANs - https://enterasys.box.com/s/eo2031bmh5r41rg7uoh2 VTP - https://enterasys.box.com/s/yxgfgkip94k3gpqakk9x necessary MIBs can be downloaded here: https://enterasys.box.com/s/3hc9nn2zwrm0887kgywr good luck!

RE: Share your custom Flexviews with the community

Simon_Read — Tue, 05 Nov 2013 15:02:00 GMT

I really haven't spent enough time creating new Flexviews, so I think this is a great idea. I've recently seen a number of demonstrations of software applications that seem to monitor MOS scores on our Enterasys network, simply via SNMP. I'm wondering if anybody knows how we can do this via Flexviews?

RE: Share your custom Flexviews with the community

Tamera_Rousseau — Tue, 05 Nov 2013 15:02:00 GMT

This is a great question on its own and I think others in the community might have recommendations for this question. Please reference the new topic here: Has anyone monitored MOS scores with Flexviews?

RE: Share your custom Flexviews with the community

Jason_Parker — Wed, 06 Nov 2013 12:49:00 GMT

Simon, I am not aware of a way as I do not think that there is a MIB for this information Maybe others would know this answer Jason

RE: Share your custom Flexviews with the community

Jason_Parker — Sat, 09 Nov 2013 05:51:00 GMT

All, FYI I will try to share more of the Flexviews I collected over the years in the future Jason

RE: Share your custom Flexviews with the community

Robert_Nielsen — Wed, 06 Aug 2014 01:14:00 GMT

Jason,

Please re-enable the Flexviews you had put out there previously. Box indicates they have been removed. Thanks

Bob

RE: Share your custom Flexviews with the community

Jason3 — Wed, 06 Aug 2014 02:08:00 GMT

I will need to find a new location to store these Someone else have requested the files and I sent some directly to them Please feel free to send me your email address and I can send you a zipped file