topic Re: There is no switch discovery in ZTP. in ExtremeCloud IQ- Site Engine Management Center

There is no switch discovery in ZTP.

Vicent3 — Tue, 15 Sep 2020 03:32:09 GMT

Hello,

I am configuring ZTP but the switch is not discovered, I have the following configuration.

The switch is a X440G2-12p-10G4 model, with a version 30.5.1.15.

Netsight version is 8.4.3.24.

The Switch takes IP by DHCP, I contact it by ICMP and I can telnet to it but in EMC it is not discovered.

Additionally, I already validated that you are resolving extremenetwork with the Netsight IP address but I still don't see anything in the discovered tab.

How can I resolve this situation?

Re: There is no switch discovery in ZTP.

TylerMarcotte — Tue, 15 Sep 2020 08:48:31 GMT

Hi @Vicent3 - I believe the A record you need in DNS is extremecontrol.domainname vs. extremenetwork.

If you haven’t reviewed it yet, there is a great GTAC Knowledge article availalbe here as well: https://gtacknowledge.extremenetworks.com/articles/How_To/What-configuration-is-needed-for-ZTP-Zero-Touch-Provisioning-Plus

Re: There is no switch discovery in ZTP.

Rodney_Lacroix — Tue, 15 Sep 2020 18:25:05 GMT

Does your Operations panel say that the devices are being discovered? If so, then check your Actions tab and make sure the “Automatically Add” option is enabled.

Re: There is no switch discovery in ZTP.

Vicent3 — Tue, 15 Sep 2020 22:30:11 GMT

Hello,

An apology, I misspelled you you are right, the record is extremecontrol.domainname. Domain name, it already solves me like this.

Regards.

Re: There is no switch discovery in ZTP.

Vicent3 — Tue, 15 Sep 2020 22:32:20 GMT

Hello,

If I have that option enabled.

Regards!

Re: There is no switch discovery in ZTP.

Vicent3 — Tue, 15 Sep 2020 22:35:53 GMT

Hello,

An apology, I misspelled you you are right, the record is extremecontrol.domainname. Domain name, it already solves me like this.

Regards.

Hello Tyler,

The problem is that in the discover tab, if it shows me anything.

Regards!