topic Sending alarms by mail in ExtremeCloud IQ- Site Engine Management Center

Sending alarms by mail

jflores — Sat, 05 Sep 2020 03:46:18 GMT

Hello,

I am setting up alarms to send mail with an office 365 account.

I already set this parameter.

But it throws me the following error.

Someone of you knows why or if something similar has happened to you.

Thank you.

Re: Sending alarms by mail

Michael_Andreas — Sat, 05 Sep 2020 17:48:17 GMT

Hi,

The account name xxxxxDiagnostic is added in the SxxW code and Office365 does not allow as a Mail From recipent

220 DB6PR07CA0060.outlook.office365.com Microsoft ESMTP MAIL Service ready at Mon, 21 Aug 2017 08:41:31 +0000
EHLO RC-RHEL6-SAL1
250-DB6PR07CA0060.outlook.office365.com Hello [xx.xx.xxx.xx]
250-SIZE 157286400
250-PIPELINING
250-DSN
250-ENHANCEDSTATUSCODES
250-STARTTLS
250-8BITMIME
250-BINARYMIME
250-CHUNKING
250 SMTPUTF8
MAIL FROM:<xxxxDiagnosticServer@xxxxxx.com>
530 5.7.57 SMTP; Client was not authenticated to send anonymous mail during MAIL FROM [xBxxx07CAx.xxx7.xx.outlook.com]
RSET
QUIT

I found an Articel which descibes that error.

http://o365info.com/send-mail-to-exchange-online-using-standard-smtp-session-2-3/

hope that helps a bit

Regards

Re: Sending alarms by mail

jflores — Fri, 11 Sep 2020 11:34:43 GMT

Thank you Michael.

Check the link that you gave me please share and make the adjustments, now the error that I think is different.

Modify the NSJBoss file, putting the following mail.smtp.port = 587
Change the server url
and now it shows me the following error:

Take a capture with netstat and if the server makes the request only that it does it through port 25 and I have port 587.

TCP    172.20.20.135:52917    104.47.56.138:25       TIME_WAIT
  TCP    172.20.20.135:52920    104.47.56.138:25       TIME_WAIT
  TCP    172.20.20.135:52923    104.47.56.138:25       TIME_WAIT

xxxxx-com-mx.mail.protection.outlook.com
Server: dns.google
Address: 8.8.8.8

Non-authoritative answer:
Name: xxxxx-com-mx.mail.protection.outlook.com
Addresses: 104.47.57.138
104.47.56.138

Has someone appeared the same error?

Regards.

Re: Sending alarms by mail

Ryan_Yacobucci — Sun, 13 Sep 2020 23:14:12 GMT

Hello,

Did you restart NetSight services after modifying the NSJboss.properties file?

Check out the following article:

https://gtacknowledge.extremenetworks.com/articles/How_To/000001549/

Thanks

-Ryan