https://community.extremenetworks.com/t5/extremecloud-iq-site-engine/demokit-using-esxi-must-need-2-physical-network-interface-cards/m-p/63954#M7721 hey everybody<BR /><BR />I am trying to implement the demo kit lab using Fujitsu server and X440-g2-12p and AP 410c&nbsp;<BR />but, I have a problem that when I add xcc VM is required to have 2 physical NICs and the Fujitsu workstation j580 only have 1 NIC<BR />is there a solution? Wed, 26 Jan 2022 12:24:26 GMT ahmeds 2022-01-26T12:24:26Z https://community.extremenetworks.com/t5/extremecloud-iq-site-engine/demokit-using-esxi-must-need-2-physical-network-interface-cards/m-p/63954#M7721 hey everybody<BR /><BR />I am trying to implement the demo kit lab using Fujitsu server and X440-g2-12p and AP 410c&nbsp;<BR />but, I have a problem that when I add xcc VM is required to have 2 physical NICs and the Fujitsu workstation j580 only have 1 NIC<BR />is there a solution? Wed, 26 Jan 2022 12:24:26 GMT https://community.extremenetworks.com/t5/extremecloud-iq-site-engine/demokit-using-esxi-must-need-2-physical-network-interface-cards/m-p/63954#M7721 ahmeds 2022-01-26T12:24:26Z https://community.extremenetworks.com/t5/extremecloud-iq-site-engine/demokit-using-esxi-must-need-2-physical-network-interface-cards/m-p/63955#M7722 Hi, in the old DemoKit (now is EOS), the XCC has got 3 interfaces and the nic0 is not connected, the nic1 is connected to VMNET10 (192.168.10.0/24) , and the nic2 is connected to VMTAP (see screenshot attached).<BR />I hope this help you. Thu, 27 Jan 2022 11:08:17 GMT https://community.extremenetworks.com/t5/extremecloud-iq-site-engine/demokit-using-esxi-must-need-2-physical-network-interface-cards/m-p/63955#M7722 Antonio_Opromol 2022-01-27T11:08:17Z