https://community.extremenetworks.com/t5/extremecloud-iq-site-engine/unable-to-see-application-data-of-phones/m-p/73794#M8399 <P>Have Telemetry Analytics configured on the core switches of the network on every port, so all traffic transitioning the network should be captured.</P> <P>When looking at the analytics ‘Application Flows’ I am not seeing any data for any IP address a phone would use.</P> <P>If I run a packet capture on the phone from the end-system section. After making various calls, the packet capture is always 0 in size?</P> <P>Think I heard that maybe because I’m using ‘App Telemetry’&nbsp; instead of a Flow Collector, UDP traffic will not be captured? Appreciate that traffic type probably will not be able to provide response times, maybe why its omited?</P> <P>That said I would have expected some TCP control traffic to have taken place when calling and hanging up the phone, so can’t explain why no Analytic data for that IP&nbsp;is showing at all?</P> <P>The telemetry configuration to the switch was all configured through XMC, so know that is all correct.</P> <P>Seem to be seeing normal telemetry data for other devices like PC’s, so thats working as expected.</P> <P>XMC version is: 8.3.1.9</P> <P>Switch EXOS: 30.2.1.8 ( X590)</P> <P>&nbsp;</P> Mon, 02 Dec 2019 20:48:22 GMT Anonymous 2019-12-02T20:48:22Z https://community.extremenetworks.com/t5/extremecloud-iq-site-engine/unable-to-see-application-data-of-phones/m-p/73794#M8399 <P>Have Telemetry Analytics configured on the core switches of the network on every port, so all traffic transitioning the network should be captured.</P> <P>When looking at the analytics ‘Application Flows’ I am not seeing any data for any IP address a phone would use.</P> <P>If I run a packet capture on the phone from the end-system section. After making various calls, the packet capture is always 0 in size?</P> <P>Think I heard that maybe because I’m using ‘App Telemetry’&nbsp; instead of a Flow Collector, UDP traffic will not be captured? Appreciate that traffic type probably will not be able to provide response times, maybe why its omited?</P> <P>That said I would have expected some TCP control traffic to have taken place when calling and hanging up the phone, so can’t explain why no Analytic data for that IP&nbsp;is showing at all?</P> <P>The telemetry configuration to the switch was all configured through XMC, so know that is all correct.</P> <P>Seem to be seeing normal telemetry data for other devices like PC’s, so thats working as expected.</P> <P>XMC version is: 8.3.1.9</P> <P>Switch EXOS: 30.2.1.8 ( X590)</P> <P>&nbsp;</P> Mon, 02 Dec 2019 20:48:22 GMT https://community.extremenetworks.com/t5/extremecloud-iq-site-engine/unable-to-see-application-data-of-phones/m-p/73794#M8399 Anonymous 2019-12-02T20:48:22Z