NetSight SNMPv3 trap receive error incorrect community name

Matt_Dillion — Fri, 29 Jan 2021 03:57:10 GMT

I am working on SNMPv3 configuration on Enterasys C5 switch and I am running into an issue with NetSight. It would appear that NetSight doesn’t like the community name, however, this same configuration has been working on many of our switches for years now. I am at a loss and would love some guidance, below is my configuration and other pertinent information.

Please help!!! I’m going Mad! ; )

C5 Switch Config

EngineId: 80:00:15:f8:03:20:b3:99:6d:ad:6c

set snmp access SNMPv3 security-model usm privacy exact read All write All notify All nonvolatile

set snmp group SNMPv3 user CNUNet security-model usm
set snmp notify TVTrapTag tag TVTrapTag
set snmp targetaddr NetSight 10.1.10.254 param TV1CNUNet taglist TVTrapTag nonVolatile
set snmp targetparams TV1CNUNet user CNUNet security-model usm message-processing v3 privacy
set snmp user CNUNet authentication sha ********* encryption des privacy ***********

NetSight

snmptrapd.conf has the following line entry

createUser -e 0x800015f80320b3996dad6c CNUNet SHA1 ******** DES ********

snmpd service has been restarted with command = service nssnmptrapd restart

from location /etc/init.d$

Re: NetSight SNMPv3 trap receive error incorrect community name

Matt_Dillion — Fri, 29 Jan 2021 04:23:58 GMT

So……..come to find out the message indicates that something else is trying to communicate via SNMP but is using the wrong credentials!

My mind is now at ease. ; )

topic Re: NetSight SNMPv3 trap receive error incorrect community name in ExtremeCloud IQ- Site Engine Management Center

NetSight SNMPv3 trap receive error incorrect community name

Re: NetSight SNMPv3 trap receive error incorrect community name