topic Re: Individual Interface Alarms in XMC in ExtremeCloud IQ- Site Engine Management Center

Individual Interface Alarms in XMC

Extreme-LoCo — Fri, 14 Jun 2019 19:17:04 GMT

Is it possible to configure, or does anyone have any alert templates for, individual interface alarms(Up/Down)? I would like to be able to configured interface up/down alarms for specific ports on switches (Uplinks and APs) but not get an alarm each time a user port goes Up/Down on the same switch.

Re: Individual Interface Alarms in XMC

Ronald_Dvorak — Fri, 14 Jun 2019 19:50:41 GMT

Hi,

you'd create a new device group...

Then add the port to the device group...

And then in the alarm select the Device Group as a Additional Criteria.

In that case you should only get a alarm for a link down if the port is part of this Device Group.

-Ron

Re: Individual Interface Alarms in XMC

Extreme-LoCo — Fri, 14 Jun 2019 19:54:27 GMT

Would the device group, ex. APs, be able to span multiple devices or would each device need its own device group?

Re: Individual Interface Alarms in XMC

Extreme-LoCo — Fri, 14 Jun 2019 19:56:53 GMT

NVM, I think my answer is self-explanatory. Thank you !

Re: Individual Interface Alarms in XMC

Ronald_Dvorak — Fri, 14 Jun 2019 19:59:28 GMT

You'd put ports of different devices in one device group.

E.g. I've 4ports in my group - 3 ports of my switch and 1 from my FW