topic Re: XMC search for devices with specific VLANs in ExtremeCloud IQ- Site Engine Management Center

XMC search for devices with specific VLANs

MichaelM1 — Mon, 16 May 2022 17:42:07 GMT

Is there a way inside XMC to search or run a report for all the switches in my environment that have a specific VLAN ID programmed in them?

Ex. Display all switches that have vlan 110

Re: XMC search for devices with specific VLANs

Ludovico_Steven — Tue, 17 May 2022 09:45:24 GMT

Re: XMC search for devices with specific VLANs

MichaelM1 — Tue, 17 May 2022 16:10:46 GMT

@Ludovico Stevens

Can you link that image or send it to me. I cant blow it up to see the details.

Thanks

Re: XMC search for devices with specific VLANs

Ludovico_Steven — Tue, 17 May 2022 20:25:19 GMT

As attachment now.

Re: XMC search for devices with specific VLANs

bar — Wed, 18 May 2022 09:30:24 GMT

It's probably worth saying that to get to the view that Ludovico has posted you need Fabric Manager.
To get to the Fabric view, go to Network Devices, Sites, then Right Click on a map and choose "More Views"->"Fabric Topology"

It took me ages to find this!

Re: XMC search for devices with specific VLANs

Ludovico_Steven — Wed, 18 May 2022 09:48:22 GMT

No! It's not Fabric Manager!
It's any XIQ-SE map, then expand the panel on the right hand side and select the VLAN tab.
You get a list of all VLANs, where you can chose the VLANs to highlight.

Re: XMC search for devices with specific VLANs

bar — Wed, 18 May 2022 09:55:31 GMT

sorry, my bad, I was just so excited to have found the fabric topology map!

This is really useful for finding L2 and L3 vsns (rather than vlans)

apologies again.

Re: XMC search for devices with specific VLANs

Ludovico_Steven — Wed, 18 May 2022 10:10:55 GMT

So Fabric Manager is good for locating fabric services, so yes VLANs which are L2VSNs (= a VLAN with an I-SID assigned) and VRFs which are L3VSNs ( = a VRF with an I-SID assigned).
Whereas the base XIQ-SE maps will locate any VLAN, even VLANs that have no I-SID assigned.

Re: XMC search for devices with specific VLANs

bar — Wed, 18 May 2022 10:44:15 GMT

@Ludovico Stevens
Particularly useful for the L3 VSNs as I have yet to find an equivalent of the command:
show isis spbm i-sid all
which only shows the L2 VSNs.

Unless you are aware of one?

Re: XMC search for devices with specific VLANs

Ludovico_Steven — Wed, 18 May 2022 11:36:27 GMT

show ip ipvpn

Re: XMC search for devices with specific VLANs

bar — Wed, 18 May 2022 11:56:39 GMT

@Ludovico Stevens
that's great, but it doesn't show which other switches have the ISID configured like the
show isis spbm i-sid all
command