topic RE: Delete syslog configuration in ExtremeCloud IQ- Site Engine Management Center

Delete syslog configuration

Christopher_Tay — Fri, 24 Feb 2017 03:52:00 GMT

I have a few X440 switches where they have been programmed with multiple syslog targets. I want to delete the old configuration and add in the proper syslog target. I have found multiple articles on how to configure syslog but none on how to delete old configuration. I have tried to "disable syslog" and then "unconfigure" but the entry under "show log config" still persists.

RE: Delete syslog configuration

Patrick_Voss — Fri, 24 Feb 2017 03:56:00 GMT

You should be able to delete each individual one with the beginning of the command below:

"configure syslog delete"

The rest you can tab out and see how specific it wants you to be.

RE: Delete syslog configuration

simon_bingham — Fri, 24 Feb 2017 04:01:00 GMT

from my notes i have an example
# to delete all the syslog setup

configure syslog delete 172.28.0.104 vr "VR-Default" local0

RE: Delete syslog configuration

Tooley__Akiko — Fri, 24 Feb 2017 04:01:00 GMT

The syslog configuration will remain if syslog is disabled. You will need to issue the command "configure syslog delete vr " to remove the entries.

RE: Delete syslog configuration

Christopher_Tay — Fri, 24 Feb 2017 20:52:00 GMT

Thanks.