topic Elrp Duration. in ExtremeCloud IQ- Site Engine Management Center

Elrp Duration.

Darrin_Tingey — Tue, 14 May 2019 05:16:12 GMT

I would like to be able to change the ELRP disable ports duration, However, when I enter the Following. "config elrp-client periodic Student ports all interval 1 log-and-trap disable-ports ingress duration 120" . I get an error ERROR: An active session already exists for "CLI:student" . If I try to disable client then I get a failure client is disabled? I would like to be able to change this any help i found some Netsight scripts but not a command procedure.

Thank

Re: Elrp Duration.

Lhjohnson14 — Mon, 02 Dec 2024 18:19:44 GMT

You have to unconfigure elrp-client Vlan_name then make the change.

Re: Elrp Duration.

roxanne41watts — Sat, 11 Jan 2025 06:05:45 GMT

To change the ELRP disable ports duration, you need to first unconfigure the existing ELRP client configuration for the VLAN, then apply the new settings. Try running the following commands:

Unconfigure ELRP Client: unconfigure elrp-client vlan_name
Apply New Settings: config elrp-client periodic vlan_name ports all interval 1 log-and-trap disable-ports ingress duration 120

This should resolve the issue with the active session error.