https://community.extremenetworks.com/t5/extremecloud-iq-site-engine/policy-manager-vs-wireless-controller-v2110/m-p/90983#M9564 Hello guys,<BR /> <BR /> I've some doubts about Policy Manager + Wireless Controller<BR /> <BR /> 1. When I'm creating a rule manually on Wireless Controller there are two options of Direction: In Filter and Out Filter. How done this configuration using PM? <BR /> <BR /> 2. It was created a rule to permit access to IP/32 and another rule to deny Range/16. When I enforce by PM, the order of rules is: First order: Deny Range/16 and Second Order: Permit IP/32.<BR /> How could I create an order in the rules using PMthat is performed first IP/32 and then Range/16?<BR /> <BR /> Best regards,<BR /> <BR /> Edson Moura Wed, 24 Jul 2019 22:02:28 GMT Edson_Moura 2019-07-24T22:02:28Z https://community.extremenetworks.com/t5/extremecloud-iq-site-engine/policy-manager-vs-wireless-controller-v2110/m-p/90983#M9564 Hello guys,<BR /> <BR /> I've some doubts about Policy Manager + Wireless Controller<BR /> <BR /> 1. When I'm creating a rule manually on Wireless Controller there are two options of Direction: In Filter and Out Filter. How done this configuration using PM? <BR /> <BR /> 2. It was created a rule to permit access to IP/32 and another rule to deny Range/16. When I enforce by PM, the order of rules is: First order: Deny Range/16 and Second Order: Permit IP/32.<BR /> How could I create an order in the rules using PMthat is performed first IP/32 and then Range/16?<BR /> <BR /> Best regards,<BR /> <BR /> Edson Moura Wed, 24 Jul 2019 22:02:28 GMT https://community.extremenetworks.com/t5/extremecloud-iq-site-engine/policy-manager-vs-wireless-controller-v2110/m-p/90983#M9564 Edson_Moura 2019-07-24T22:02:28Z