topic Re: Getting error when try to add Extreme-Dynamic-Client-Assignments in ExtremeControl

Getting error when try to add Extreme-Dynamic-Client-Assignments

RobertD1 — Tue, 01 Apr 2025 19:44:05 GMT

Hello,

I'm getting errors when I paste and save the following into a RADIUS attribute to send back to a VOSS switch when I configure it in Extreme Control.

Edited the switch settings and created a new RADIUS attribute to send called Extreme VOSS - Platform VLAN Creation.

When I add the below and click save I get errors.

Extreme-Dynamic-Client-Assignments=create=vlan, pv=%VLAN_ID%,vni=%CUSTOM1%, ev=%VLAN_EGRESS%, vn=%VLAN_NAME%, vnin=%CUSTOM2%
%ORG1_RADIUS_ATTRS_LIST%
%ORG2_RADIUS_ATTRS_LIST%
Passport-Accept-Priority=%MGMT_SERV_TYPE%

Error

The following problem(s) were found in the attributes:

Attribute in Extreme-Dynamic-Client-Assignments=create=vlan, pv=%VLAN_ID%,vni=%CUSTOM1%, ev=%VLAN_EGRESS%, vn=%VLAN_NAME%, vnin=%CUSTOM2% is invalid.
Attribute in Passport-Accept-Priority=%MGMT_SERV_TYPE% is invalid.

Any ideas why this is happening, I see there is VSA called Extreme-Dynamic-Client-Assignments in the release of Extreme Control 24.10.13.5.

Thanks,

Rob

Re: Getting error when try to add Extreme-Dynamic-Client-Assignments

edna23roe — Wed, 02 Apr 2025 09:35:41 GMT

The errors you're seeing in Extreme Control likely stem from incorrect syntax or variable issues within your RADIUS attributes (`Extreme-Dynamic-Client-Assignments` and `Passport-Accept-Priority`). Verify the exact VSA syntax in the Extreme Control documentation, carefully check the values of your variables, and consult the system logs for detailed error messages.

Re: Getting error when try to add Extreme-Dynamic-Client-Assignments

RobertD1 — Wed, 02 Apr 2025 10:06:13 GMT

Thanks for your reply. I corrected the syntax and also took one from someone else where it worked. Had same issue with theirs. After restarting XIQ-SE I was able to add the attributes okay and save.

Re: Getting error when try to add Extreme-Dynamic-Client-Assignments

Robert_Haynes — Wed, 02 Apr 2025 13:10:23 GMT

Passport-Accept-Priority -> Passport-Access-Priority

The syntax for the other AVP appears correct so unsure why it would have been flagged.