https://community.extremenetworks.com/t5/extremecontrol/what-is-the-procedure-for-removing-a-switch-from-extremecontrol/m-p/119594#M2106 <P>Is the procedure to:</P><OL><LI>Disable Netlogin via CLI</LI><LI>Delete Switch from Control&gt;Access Control&gt;Engine&gt;Engine Group</LI></OL> Tue, 05 Aug 2025 14:16:36 GMT troy_alan 2025-08-05T14:16:36Z https://community.extremenetworks.com/t5/extremecontrol/what-is-the-procedure-for-removing-a-switch-from-extremecontrol/m-p/119594#M2106 <P>Is the procedure to:</P><OL><LI>Disable Netlogin via CLI</LI><LI>Delete Switch from Control&gt;Access Control&gt;Engine&gt;Engine Group</LI></OL> Tue, 05 Aug 2025 14:16:36 GMT https://community.extremenetworks.com/t5/extremecontrol/what-is-the-procedure-for-removing-a-switch-from-extremecontrol/m-p/119594#M2106 troy_alan 2025-08-05T14:16:36Z https://community.extremenetworks.com/t5/extremecontrol/what-is-the-procedure-for-removing-a-switch-from-extremecontrol/m-p/119626#M2107 <P>If the switch is an EXOS / VOSS switch and the setting is not "Manual Configuration" then upon deleting the switch from the switches list in Control - Control should reach out on Enforce and remove the configuration automatically on the switches.</P><P>As a precaution to this doing your steps (1) disable on switch and the (2) delete switch from Control / Enforce is also an appropriate path.</P><P>Either way the deed gets done.</P> Wed, 06 Aug 2025 15:47:36 GMT https://community.extremenetworks.com/t5/extremecontrol/what-is-the-procedure-for-removing-a-switch-from-extremecontrol/m-p/119626#M2107 Robert_Haynes 2025-08-06T15:47:36Z