https://community.extremenetworks.com/t5/extremecontrol/nac-pushing-radius-config/m-p/94520#M356 <P>I'm not quite sure on the specifics of this interaction but I believe we issue the equivalent of "no radius server host x used-by eapol" followed by a "radius server host x key y used-by eapol enable". I would expect on VOSS that an existing line "used-by web" (or whatever its exact format is) would not be removed by the above "no" line. If it is, I would say that is unexpected / undesired behavior.</P> Thu, 26 Jan 2023 13:56:24 GMT Robert_Haynes 2023-01-26T13:56:24Z https://community.extremenetworks.com/t5/extremecontrol/nac-pushing-radius-config/m-p/94510#M355 <P>I've installed Extreme Control and manually configure my Radius settings on the switch.&nbsp; I've found once I add the switch to NAC (but don't enforce) the engine pushes out a new Radius config to my VOSS switch.&nbsp; I don't have a problem with this BUT it erases the previous ssh/web authentication settings (radius server host 10.x.x.x key ******* used-by web/cli).&nbsp; How do I get the ssh/web authentication into the switch policy (or get it to append the new eapol settings to the existing)?</P><P>Thanks,</P><P>Tim</P> Wed, 25 Jan 2023 15:53:17 GMT https://community.extremenetworks.com/t5/extremecontrol/nac-pushing-radius-config/m-p/94510#M355 tpfannes 2023-01-25T15:53:17Z https://community.extremenetworks.com/t5/extremecontrol/nac-pushing-radius-config/m-p/94520#M356 <P>I'm not quite sure on the specifics of this interaction but I believe we issue the equivalent of "no radius server host x used-by eapol" followed by a "radius server host x key y used-by eapol enable". I would expect on VOSS that an existing line "used-by web" (or whatever its exact format is) would not be removed by the above "no" line. If it is, I would say that is unexpected / undesired behavior.</P> Thu, 26 Jan 2023 13:56:24 GMT https://community.extremenetworks.com/t5/extremecontrol/nac-pushing-radius-config/m-p/94520#M356 Robert_Haynes 2023-01-26T13:56:24Z