topic RE: [Enterasys S8] cannot grep/find in ExtremeSwitching (EOS)

[Enterasys S8] cannot grep/find

andrea — Sat, 12 Mar 2016 22:13:00 GMT

Hi,

we have installed some months ago at our University Campus an Enterasys S8 as a core router.

With time, the configuration became quite lenghty, and having a tool to filter out the configuration would be useful.

We are running this version:

S8-Core(su)->sh ver
Copyright (c) 2015 by Extreme Networks, Inc.

Slot Model Serial # Versions
------ ---------------- -------------------- -------------------------
2 SG4101-0248 14250621596A Hw: 3
Bp: 01.01.25
Fw: 08.32.02.0009
3 SG4101-0248 14250628596A Hw: 3
Bp: 01.01.25
Fw: 08.32.02.0009
4 ST4106-0348-F6 14240038595A Hw: 2
Bp: 01.01.25
Fw: 08.32.02.0009
5 ST4106-0348-F6 14240037595A Hw: 2
Bp: 01.01.25
Fw: 08.32.02.0009

Option Modules:

Slot Module Model Serial # Versions
---- ------ ---------------- -------------------- -------------------------
4 1 SOK2208-0102 14160556595A Hw: 10
5 1 SOK2208-0102 14170009595A Hw: 10

RE: [Enterasys S8] cannot grep/find

Jeremy_Gibbs — Sat, 12 Mar 2016 22:20:00 GMT

Show config |find somesearchstring

RE: [Enterasys S8] cannot grep/find

Jeremy_Gibbs — Sat, 12 Mar 2016 22:21:00 GMT

Make sure it's |find. If you include a space after the pipe, find won't work.

RE: [Enterasys S8] cannot grep/find

andrea — Sat, 12 Mar 2016 22:24:00 GMT

Thanks Jeremy, it works.

I was used with Juniper/Cisco/HP to always include a space after pipe, so I couldn't realize this.

Also, I don't find really helpful that after writing "|?" the CLI doesn't give you any clue.

Regards,

Andrea

RE: [Enterasys S8] cannot grep/find

Jeremy_Gibbs — Mon, 14 Mar 2016 11:18:00 GMT

Yeah, I don't know why they haven't made the search more robust. I have put it in as a feature request many times.