topic RE: how to enable data collection for one port of my switch (series B5) in ExtremeSwitching (EOS)

how to enable data collection for one port of my switch (series B5)

Visconti — Tue, 28 Aug 2018 12:52:00 GMT

can anyone say me how to enable data collection for one port of my switch (series B5) ?

RE: how to enable data collection for one port of my switch (series B5)

Tomasz — Tue, 28 Aug 2018 14:43:00 GMT

Hello,

For statistics collection I recommend to do two things:
- with right-click on your B5 from devices list select 'Collect device statistics' and enable it;
- with right-click on your B5 from devices list go to View -> Interface summary, or Port tree, and over there you can right-click on the port and select 'Collect interface statistics' option.
Please remember to have correct SNMP credentials on both sides.
I recommend you to bookmark the XMC manual, which is also publicly available online: https://emc.extremenetworks.com/ - you will find a lot of other useful things inside. 🙂

Regards
Tomasz

RE: how to enable data collection for one port of my switch (series B5)

Zdeněk_Pala — Wed, 29 Aug 2018 12:02:00 GMT

I expect your question is about Extreme Management and B5, while the question is under EXOS. Tomasz did answer that

If your question is related to EXOS, please redefine your question.