https://community.extremenetworks.com/t5/extremeswitching-eos/c5-6-81-07-4-igmp-configuration/m-p/59154#M1516 Dear all,<BR /> <BR /> The firmware version 6.81.07.4 for C5 now includes the command set igmp enable <VLAN_ID> (before only available for the K/S). <BR /> <BR /> This command replaces the following 2 commands required for the old firmware versions ?<BR /> <BR /> set igmpsnooping interfacemode *.*.* enableset igmpsnooping adminmode enable Many thanks for your support</VLAN_ID> Tue, 28 Jun 2016 15:12:00 GMT Luis_Oliveira 2016-06-28T15:12:00Z https://community.extremenetworks.com/t5/extremeswitching-eos/c5-6-81-07-4-igmp-configuration/m-p/59154#M1516 Dear all,<BR /> <BR /> The firmware version 6.81.07.4 for C5 now includes the command set igmp enable <VLAN_ID> (before only available for the K/S). <BR /> <BR /> This command replaces the following 2 commands required for the old firmware versions ?<BR /> <BR /> set igmpsnooping interfacemode *.*.* enableset igmpsnooping adminmode enable Many thanks for your support</VLAN_ID> Tue, 28 Jun 2016 15:12:00 GMT https://community.extremenetworks.com/t5/extremeswitching-eos/c5-6-81-07-4-igmp-configuration/m-p/59154#M1516 Luis_Oliveira 2016-06-28T15:12:00Z https://community.extremenetworks.com/t5/extremeswitching-eos/c5-6-81-07-4-igmp-configuration/m-p/59155#M1517 Hello Luis,<BR /> <BR /> The vlan enable mode command replaces the interface mode command. IGMP will still need to be globally enabled. <BR /> <BR /> Best regards<BR /> Mike Tue, 28 Jun 2016 17:22:00 GMT https://community.extremenetworks.com/t5/extremeswitching-eos/c5-6-81-07-4-igmp-configuration/m-p/59155#M1517 Mike_D 2016-06-28T17:22:00Z