https://community.extremenetworks.com/t5/extremeswitching-eos/snmpset-to-clear-arp-table-entry-on-the-s4-enterasys-sw/m-p/59352#M1578 I am trying to remotely clear one entry in a ARP table of the s4 Enterasys SW using the following command snmpset -v2c -c 1.3.6.1.2.1.4.22.1.4.108.204.136.234 i 2, but it shows an error: "Error in packet." Reason: commitFailed. It works with other models such B5G124-48. Tue, 13 Jun 2017 21:32:00 GMT Claudio_Sao_Pau 2017-06-13T21:32:00Z https://community.extremenetworks.com/t5/extremeswitching-eos/snmpset-to-clear-arp-table-entry-on-the-s4-enterasys-sw/m-p/59352#M1578 I am trying to remotely clear one entry in a ARP table of the s4 Enterasys SW using the following command snmpset -v2c -c 1.3.6.1.2.1.4.22.1.4.108.204.136.234 i 2, but it shows an error: "Error in packet." Reason: commitFailed. It works with other models such B5G124-48. Tue, 13 Jun 2017 21:32:00 GMT https://community.extremenetworks.com/t5/extremeswitching-eos/snmpset-to-clear-arp-table-entry-on-the-s4-enterasys-sw/m-p/59352#M1578 Claudio_Sao_Pau 2017-06-13T21:32:00Z https://community.extremenetworks.com/t5/extremeswitching-eos/snmpset-to-clear-arp-table-entry-on-the-s4-enterasys-sw/m-p/59353#M1579 in that command you failed to include a community (-c) and IP. if these were omitted intentionally then can you check the snmp section within the S4 to verify you have read/write access? Wed, 12 Jul 2017 12:23:00 GMT https://community.extremenetworks.com/t5/extremeswitching-eos/snmpset-to-clear-arp-table-entry-on-the-s4-enterasys-sw/m-p/59353#M1579 Matthew_Hum 2017-07-12T12:23:00Z