topic RE: How to display info about rtr interfaces in C5 switches in ExtremeSwitching (EOS)

How to display info about rtr interfaces in C5 switches

Weda — Wed, 20 Apr 2016 13:40:00 GMT

According to my switch monitoring tool, Oper state is down and Admin state is up for rtr.0.1.
But if I issue "show port" , "show ip interface" I can not see such an interface. How to get an idea about the relation between rtr interfaces and vlans ?

RE: How to display info about rtr interfaces in C5 switches

Allen_George — Mon, 09 May 2016 20:09:00 GMT

Hello Weda,

The best command to determine this is by using the command 'show mac type mgmt'

Regards,
Allen George
Extreme Networks

RE: How to display info about rtr interfaces in C5 switches

Don_Diamant — Tue, 10 May 2016 00:00:00 GMT

The rtr.0.1 is a virtual port representing a router interface in a VLAN. If an interface is created on a VLAN the virtual rtr port will remain down until there is an active physical port that has been assigned to that VLAN.

RE: How to display info about rtr interfaces in C5 switches

Daniel_Coughlin — Tue, 02 Aug 2016 19:41:00 GMT

We have changed how this work since this question was posted. In the release notes for 8.61.08 you will find the following:
Modified the routing command “show interface” to have rtr.0.x in output instead of repeating vlan xxx and modified linkup/linkdown syslog to have ifName instead of unit/slot/port.