https://community.extremenetworks.com/t5/extremeswitching-eos/blade-1-of-2-failed-in-bonded-s1-chassis/m-p/60133#M1879 Will the configuration copy over to the replacement blade once the chassis sees the new blade. Or will I have to redo the config for the replaced blade, in a bonded situation. Thu, 29 Oct 2015 20:53:00 GMT Ako_Singletary 2015-10-29T20:53:00Z https://community.extremenetworks.com/t5/extremeswitching-eos/blade-1-of-2-failed-in-bonded-s1-chassis/m-p/60133#M1879 Will the configuration copy over to the replacement blade once the chassis sees the new blade. Or will I have to redo the config for the replaced blade, in a bonded situation. Thu, 29 Oct 2015 20:53:00 GMT https://community.extremenetworks.com/t5/extremeswitching-eos/blade-1-of-2-failed-in-bonded-s1-chassis/m-p/60133#M1879 Ako_Singletary 2015-10-29T20:53:00Z https://community.extremenetworks.com/t5/extremeswitching-eos/blade-1-of-2-failed-in-bonded-s1-chassis/m-p/60134#M1880 It is a bit more complicated when working with singe fabric systems. The bond must be <BR /> establisted first then the configuration pushed.<BR /> Please read the following article:<BR /> <A href="https://community.extremenetworks.com/extreme/topics/s-series-virtual-switch-bonding-chassis-replacement-procedure" target="_blank" rel="nofollow noreferrer noopener">https://community.extremenetworks.com/extreme/topics/s-series-virtual-switch-bonding-chassis-replace...</A><BR /> <BR /> If you are still having trouble give us a call.<BR /> Thu, 29 Oct 2015 23:52:00 GMT https://community.extremenetworks.com/t5/extremeswitching-eos/blade-1-of-2-failed-in-bonded-s1-chassis/m-p/60134#M1880 Daniel_Coughlin 2015-10-29T23:52:00Z