https://community.extremenetworks.com/t5/extremeswitching-eos/vsb-change-blade/m-p/61598#M2012 <P>We have installed two S8 chassis, bonding them using VSB.</P> <P>Each chassis has three fabric blade and two IO blade.</P> <P><BR /> The VSB bonding ports (3) are connected on the two Fabric Blade (each chassis): Board 4 with Board 12 and Board 5 with Board 13.</P> <P>The problem: one fabric blade (chassis 2) it has problems "board in slot 12 of the chassis is not operational" after 5 minutes "board in slot 12 of the chassis is operational". Has&nbsp;days the blade not have problem, but I think about change to the other fabric blade.&nbsp;</P> <P><BR /> My question, when I remove configuration vsb board 4 with board 12 my network is going down or the vsb bonding ports blade 5 with blade 13 keeps the network up.</P> <P>Thks for the attention</P> Thu, 28 Nov 2019 00:50:33 GMT Paulo_Silva 2019-11-28T00:50:33Z https://community.extremenetworks.com/t5/extremeswitching-eos/vsb-change-blade/m-p/61598#M2012 <P>We have installed two S8 chassis, bonding them using VSB.</P> <P>Each chassis has three fabric blade and two IO blade.</P> <P><BR /> The VSB bonding ports (3) are connected on the two Fabric Blade (each chassis): Board 4 with Board 12 and Board 5 with Board 13.</P> <P>The problem: one fabric blade (chassis 2) it has problems "board in slot 12 of the chassis is not operational" after 5 minutes "board in slot 12 of the chassis is operational". Has&nbsp;days the blade not have problem, but I think about change to the other fabric blade.&nbsp;</P> <P><BR /> My question, when I remove configuration vsb board 4 with board 12 my network is going down or the vsb bonding ports blade 5 with blade 13 keeps the network up.</P> <P>Thks for the attention</P> Thu, 28 Nov 2019 00:50:33 GMT https://community.extremenetworks.com/t5/extremeswitching-eos/vsb-change-blade/m-p/61598#M2012 Paulo_Silva 2019-11-28T00:50:33Z