topic Re: C5 Manage in ExtremeSwitching (EOS)

C5 Manage

Paulo_Silva — Wed, 20 May 2020 23:38:08 GMT

Hi.

I want manage the switch C5 using that VLAN's interface IP, access by ssh too.

Is it possible?

Thks.

Paulo Maurício

Tomasz — Thu, 21 May 2020 04:38:37 GMT

Hi Paulo,

You mean C5 working as L2 or as L3 switch? Both switch IP can be set (‘set ip address … mask … gateway ...’) or IP interfaces can be created.

Hope that helps,

Tomasz

Paulo_Silva — Thu, 21 May 2020 18:53:32 GMT

Hi Tomas.

The switch C5 will working as L3.

I would like to know if access via ssh could be configured for the ip interface address.

Thks for your help.

Paulo Maurício

Ronald_Dvorak — Fri, 22 May 2020 04:36:59 GMT

You’d enable ssh as a global command and then you are able to connect to that IP via ssh.

# set ssh enable

-Ron

Paulo_Silva — Fri, 22 May 2020 19:09:26 GMT

Hi Ronald.

Thank you for your help.

Paulo Maurício

Stefan_K_ — Fri, 22 May 2020 19:20:44 GMT

Just an information:

If the C5 would have been a simple L2-Switch, you can change the Mgmt-VLAN by using the command

set host vlan VLAN-ID

Paulo_Silva — Sun, 24 May 2020 20:20:43 GMT

Hi Stefan.

I usually configure it this way. It is the first time I set up as C5 L3, the idea  is to replace an 3COM 5500 switch.

Thks for your help.

Paulo Maurício