https://community.extremenetworks.com/t5/extremeswitching-eos/connfiguring-multiple-gateway-s-series/m-p/90220#M2269 You can configure multiple next hops for the same route and the one with the lowest administrative distance will be preferred (Top route below).<BR /> <BR /> ip route 0.0.0.0/0 192.168.0.50 1<BR /> ip route 0.0.0.0/0 192.168.0.1 2<BR /> <BR /> You can also use a probe to monitor the next hop and the article below shows how to use the probe for redundant internet connections but you could simply probe the next hop and it would be removed from the route table if the probe failed.<BR /> <BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/How_To/How-To-Configure-Redundancy-to-a-Cloud-with-a-Remote-IP-Using-a-Static-route-with-a-Probe" target="_blank" rel="nofollow noreferrer noopener"><U>https://gtacknowledge.extremenetworks.com/articles/How_To/How-To-Configure-Redundancy-to-a-Cloud-with-a-Remote-IP-Using-a-Static-route-with-a-Probe</U></A> Sat, 02 Mar 2019 01:25:27 GMT Luke_French 2019-03-02T01:25:27Z https://community.extremenetworks.com/t5/extremeswitching-eos/connfiguring-multiple-gateway-s-series/m-p/90219#M2268 Hello,<BR /> Is there any configuration in S-Series where we can configure multiple gateway for same route in redundancy. Condition is when first gateway or next hop is not rechable then packet should flow to next gateway or hop Fri, 01 Mar 2019 12:32:58 GMT https://community.extremenetworks.com/t5/extremeswitching-eos/connfiguring-multiple-gateway-s-series/m-p/90219#M2268 Nachiket_Pathak 2019-03-01T12:32:58Z https://community.extremenetworks.com/t5/extremeswitching-eos/connfiguring-multiple-gateway-s-series/m-p/90220#M2269 You can configure multiple next hops for the same route and the one with the lowest administrative distance will be preferred (Top route below).<BR /> <BR /> ip route 0.0.0.0/0 192.168.0.50 1<BR /> ip route 0.0.0.0/0 192.168.0.1 2<BR /> <BR /> You can also use a probe to monitor the next hop and the article below shows how to use the probe for redundant internet connections but you could simply probe the next hop and it would be removed from the route table if the probe failed.<BR /> <BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/How_To/How-To-Configure-Redundancy-to-a-Cloud-with-a-Remote-IP-Using-a-Static-route-with-a-Probe" target="_blank" rel="nofollow noreferrer noopener"><U>https://gtacknowledge.extremenetworks.com/articles/How_To/How-To-Configure-Redundancy-to-a-Cloud-with-a-Remote-IP-Using-a-Static-route-with-a-Probe</U></A> Sat, 02 Mar 2019 01:25:27 GMT https://community.extremenetworks.com/t5/extremeswitching-eos/connfiguring-multiple-gateway-s-series/m-p/90220#M2269 Luke_French 2019-03-02T01:25:27Z