topic RE: Does EOS support multi ospf process under the same VR in ExtremeSwitching (EOS)

Does EOS support multi ospf process under the same VR

Wallance — Fri, 17 Mar 2017 13:53:00 GMT

It just like cisco router ospf multi process - router ospf 1-65535

RE: Does EOS support multi ospf process under the same VR

Ram3 — Fri, 17 Mar 2017 15:39:00 GMT

One OSPF process can be used in one VRF only.

RE: Does EOS support multi ospf process under the same VR

Erik_Auerswald — Fri, 17 Mar 2017 19:27:00 GMT

Hi Wallance,

EOS on S-Series and similar switches does support multiple OSPF processes inside one VRF. According to the CLI Reference,

Multiple OSPF processes (process-id) are allowed per router. The S- K- and 7100-Series routers support 4 OSPF processes per VRF and 16 OSPF processes per router.

Please see the discussion thread S-Series: number of OSPF processes for 24 VRFs for additional info.

The limits stated in the CLI Reference are not enforced by EOS. The number of VRFs with dynamic routing protocols enabled is shown with the show limits command and probably enforced. The release notes show limits for the number of VRFs with dynamic routing protocols only.

Edit: To answer your question, EOS does support multiple OSPF processes inside one VRF similar to Cisco IOS.

Thanks,
Erik

RE: Does EOS support multi ospf process under the same VR

Wallance — Mon, 20 Mar 2017 09:00:00 GMT

Thanks Ram and Erik for your kindly response.