https://community.extremenetworks.com/t5/extremeswitching-exos-switch/exos-22-5-quot-creating-processes-on-secondary-nodes-quot/m-p/19645#M1042 One of new EXOS 22.5 Feature are this:<BR /> <BR /> "Creating Processes on Secondary Nodes"<BR /> <BR /> <BR /> <I>Changed CLI Commands</I><I><BR /> </I>Changes are underlined.<BR /> <BR /> create process <I>name </I>executable <I>exe </I>{start [<B>auto </B>| <B>on-demand</B>]} {<B>node</B><I>node</I>} {<I>vr vr-name</I>} {<B>description </B><I>description</I>} {<I>arg1 </I>{<I>arg2 </I>{ <I>arg3 </I>{ <I>arg4</I>{ <I>arg5 </I>{ <I>arg6 </I>{ <I>arg7 </I>{ <I>arg8 </I>{ <I>arg9 </I>}}}}}}}}}<BR /> create process <I>name </I><B>python-module </B><I>python-module </I>{<B>start </B>[<B>auto </B>| <B>ondemand</B>]} {<B>node </B><I>node</I>} {<B>vr </B><I>vr-name</I>} {<B>description </B><I>description</I>} {<I>arg1 </I>{<I>arg2</I>{<I>arg3 </I>{<I>arg4 </I>{<I>arg5 </I>{<I>arg6 </I>{<I>arg7 </I>{<I>arg8 </I>{<I>arg9</I>}}}}}}}}}<BR /> Unfortunately either in Manual NOR in Release Notes shows valid examples ... which some me the possibilities in the field ...<BR /> <BR /> Are there some examples out of field installations which shows the capabilities of this commands ?<BR /> <BR /> <BR /> Regards<BR /> Fri, 01 Jun 2018 13:09:00 GMT M_Nees 2018-06-01T13:09:00Z https://community.extremenetworks.com/t5/extremeswitching-exos-switch/exos-22-5-quot-creating-processes-on-secondary-nodes-quot/m-p/19645#M1042 One of new EXOS 22.5 Feature are this:<BR /> <BR /> "Creating Processes on Secondary Nodes"<BR /> <BR /> <BR /> <I>Changed CLI Commands</I><I><BR /> </I>Changes are underlined.<BR /> <BR /> create process <I>name </I>executable <I>exe </I>{start [<B>auto </B>| <B>on-demand</B>]} {<B>node</B><I>node</I>} {<I>vr vr-name</I>} {<B>description </B><I>description</I>} {<I>arg1 </I>{<I>arg2 </I>{ <I>arg3 </I>{ <I>arg4</I>{ <I>arg5 </I>{ <I>arg6 </I>{ <I>arg7 </I>{ <I>arg8 </I>{ <I>arg9 </I>}}}}}}}}}<BR /> create process <I>name </I><B>python-module </B><I>python-module </I>{<B>start </B>[<B>auto </B>| <B>ondemand</B>]} {<B>node </B><I>node</I>} {<B>vr </B><I>vr-name</I>} {<B>description </B><I>description</I>} {<I>arg1 </I>{<I>arg2</I>{<I>arg3 </I>{<I>arg4 </I>{<I>arg5 </I>{<I>arg6 </I>{<I>arg7 </I>{<I>arg8 </I>{<I>arg9</I>}}}}}}}}}<BR /> Unfortunately either in Manual NOR in Release Notes shows valid examples ... which some me the possibilities in the field ...<BR /> <BR /> Are there some examples out of field installations which shows the capabilities of this commands ?<BR /> <BR /> <BR /> Regards<BR /> Fri, 01 Jun 2018 13:09:00 GMT https://community.extremenetworks.com/t5/extremeswitching-exos-switch/exos-22-5-quot-creating-processes-on-secondary-nodes-quot/m-p/19645#M1042 M_Nees 2018-06-01T13:09:00Z