https://community.extremenetworks.com/t5/extremeswitching-exos-switch/stp-changing-the-bridge-priority-of-a-switch/m-p/44007#M10711 If I change the STP bridge priority of a switch to a lower value (from 20480 to 16384), using the command: <BR /> config stpd s0 priority 16384,<BR /> <BR /> will that change take effect immediately? If not, do I need to restart stpd?<BR /> <BR /> disable stpd s0<BR /> enable stpd s0.<BR /> <BR /> I am running ExtremeOS 11.6.5.3<BR /> <BR /> Thank you<BR /> <BR /> Fri, 31 Oct 2014 00:04:00 GMT Olivier_Delapor 2014-10-31T00:04:00Z https://community.extremenetworks.com/t5/extremeswitching-exos-switch/stp-changing-the-bridge-priority-of-a-switch/m-p/44007#M10711 If I change the STP bridge priority of a switch to a lower value (from 20480 to 16384), using the command: <BR /> config stpd s0 priority 16384,<BR /> <BR /> will that change take effect immediately? If not, do I need to restart stpd?<BR /> <BR /> disable stpd s0<BR /> enable stpd s0.<BR /> <BR /> I am running ExtremeOS 11.6.5.3<BR /> <BR /> Thank you<BR /> <BR /> Fri, 31 Oct 2014 00:04:00 GMT https://community.extremenetworks.com/t5/extremeswitching-exos-switch/stp-changing-the-bridge-priority-of-a-switch/m-p/44007#M10711 Olivier_Delapor 2014-10-31T00:04:00Z