topic RE: how to enable ovsdb in default-vr in ExtremeSwitching (EXOS/Switch Engine)

how to enable ovsdb in default-vr

Martin_Du — Wed, 02 Aug 2017 15:02:00 GMT

hello
I am trying to test ovsdb - openstack l2 gateway integration on x770 with 22.2.1.5.
I found ovsdb server just could be setted within VR-Mgmt and i cant find any command to change that. can you please show me how to change that VR for connections to VR default?
thank you very much

OPNFV-POD2-X770-1.20 # show ovsdb
OVSDB server
============
Enabled : : no
SSL certificate : missing
VR for connections : VR-Mgmt
Schemas enabled : hardware_vtep [control and data]

Configured connections : 0

RE: how to enable ovsdb in default-vr

Doug — Thu, 24 Aug 2017 00:39:00 GMT

I would suggest you contact the GTAC for assistance.
https://gtacknowledge.extremenetworks.com/articles/How_To/How-to-contact-Extreme-Networks-Global-Tec...

RE: how to enable ovsdb in default-vr

Carlos_Maldonad — Wed, 05 Dec 2018 23:11:00 GMT

Hello Martin,

I want to know if did you could clarify your question?, i´m testing the same in a X690 switches, and i have the same issue, the integration has to be in the VR-mgmt?

Regards,

Carlos

RE: how to enable ovsdb in default-vr

Erik_Auerswald — Thu, 06 Dec 2018 00:43:00 GMT

Hi,

I cannot test this, but from looking at the documentation it seems to me as if the VR for OVSDB connections cannot be specified, thus only VR-Mgmt, i.e. the management port, can be used.

Thanks,
Erik

RE: how to enable ovsdb in default-vr

Carlos_Maldonad — Thu, 06 Dec 2018 00:55:00 GMT

Hi Erik,
Thanks for your reply, it seems is only possible by management port. I Will test and tell you how Works.