https://community.extremenetworks.com/t5/extremeswitching-exos-switch/routing-between-vlans/m-p/19793#M1079 Create Date: Jul 13 2013 1:09PM<BR /> <BR /> I am trying to get two VLANs which are configured in the same switch to communicate between each other. To my understanding, the switch can do layer 3 routing between VLANs that are configured in the same switch with no need of a physical router. If anyone can tell me the steps i need to take to make this happen. Thanks<BR /> <BR /> Switch Model: Extreme Summit 400-48t<BR /> OS: EXTREMEWARE<BR /> <BR /> (from William_Martinez) Wed, 08 Jan 2014 08:53:00 GMT EtherNation_Use 2014-01-08T08:53:00Z https://community.extremenetworks.com/t5/extremeswitching-exos-switch/routing-between-vlans/m-p/19793#M1079 Create Date: Jul 13 2013 1:09PM<BR /> <BR /> I am trying to get two VLANs which are configured in the same switch to communicate between each other. To my understanding, the switch can do layer 3 routing between VLANs that are configured in the same switch with no need of a physical router. If anyone can tell me the steps i need to take to make this happen. Thanks<BR /> <BR /> Switch Model: Extreme Summit 400-48t<BR /> OS: EXTREMEWARE<BR /> <BR /> (from William_Martinez) Wed, 08 Jan 2014 08:53:00 GMT https://community.extremenetworks.com/t5/extremeswitching-exos-switch/routing-between-vlans/m-p/19793#M1079 EtherNation_Use 2014-01-08T08:53:00Z https://community.extremenetworks.com/t5/extremeswitching-exos-switch/routing-between-vlans/m-p/19794#M1080 Create Date: Jul 15 2013 9:47AM<BR /> <BR /> 1. Create the vlans (create vlan)<BR /> 2. Set ip addresses on them (configure vlan xxx ipaddress)<BR /> 3. Enable globlal ip-forwarding (enable ipforwarding)<BR /> 4. Enable ipforwarding for the specific vlans (enable ipforwarding xxx)<BR /> <BR /> That should be enough i guess.. <BR /> (from Henric) Wed, 08 Jan 2014 08:53:00 GMT https://community.extremenetworks.com/t5/extremeswitching-exos-switch/routing-between-vlans/m-p/19794#M1080 EtherNation_Use 2014-01-08T08:53:00Z