topic RE: Slot-1: Login failed through SNMPv3 - wrong digest in ExtremeSwitching (EXOS/Switch Engine)

Slot-1: Login failed through SNMPv3 - wrong digest

Darren_Saliva — Wed, 03 Aug 2016 19:19:00 GMT

I swapped out a switch in my stack and now i am seeing this error message in the logs. I cannot find anything online for this specific log. Does anyone know what this means? The service thats trying to run snmp queries has always been able to before i replaced the switch.

RE: Slot-1: Login failed through SNMPv3 - wrong digest

Ronald_Dvorak — Wed, 03 Aug 2016 19:35:00 GMT

You'd check out this articles ...

]http://www.extremenetworks.com/search/#q=Login%20failed%20through%20SNMPv3%20not%20in%20life%20time&...

RE: Slot-1: Login failed through SNMPv3 - wrong digest

Ken_Thomas — Wed, 03 Aug 2016 20:20:00 GMT

Thanks Ron for pointing to the new improved search on the extreme networks corporate site, that does have the ability to filter for knowledge and community (The Hub) sources.

Darren, does Ron's search link work ok for you? should take you to the extreme networks search page with a search for "Login failed through SNMPv3 not in life time" with Knowledge and Community filters selected. There are a handful of knowledge articles found, one looks like it might be helpful. Let us know if the search works for you!

We hope to soon have an even better search in the new support portal more which is in beta right now.

RE: Slot-1: Login failed through SNMPv3 - wrong digest

Darren_Saliva — Wed, 03 Aug 2016 20:25:00 GMT

I saw the not in lifetime article but my error says wrong digest. Is that mentioned in that article?

RE: Slot-1: Login failed through SNMPv3 - wrong digest

Ken_Thomas — Wed, 03 Aug 2016 20:25:00 GMT

I don't see any existing article with the wrong digest error message related to SNMPv3. Hopefully some of the experts will chime in on this error and help get it resolved

RE: Slot-1: Login failed through SNMPv3 - wrong digest

Ronald_Dvorak — Wed, 03 Aug 2016 20:25:00 GMT

Sorry my bad - I've messed up the search - there are no articles with "wrong digest"

RE: Slot-1: Login failed through SNMPv3 - wrong digest

Prashanth_KG — Thu, 04 Aug 2016 07:44:00 GMT

Hi Darren,

Please share more information about the stack:

- Are you using any server with IPv6 interface to poll the switch?
- The switch which is swapped, was it replaced as a master node in the stack?
- What is the Software version running in the switch and the hardware used?

Looking forward to the requested information. Thanks in advance.

RE: Slot-1: Login failed through SNMPv3 - wrong digest

Darren_Saliva — Thu, 04 Aug 2016 17:59:00 GMT

The stack is a 2 switch stack

No IPv6

The new switch is now the master

15.5.3.4 patch1-6

RE: Slot-1: Login failed through SNMPv3 - wrong digest

M_Nees — Wed, 26 Oct 2016 20:46:00 GMT

Some error with X440-G2 V21.1.1.4 and Netsight V7.0.6.

Any solution since thread startup ?

RE: Slot-1: Login failed through SNMPv3 - wrong digest

Bob_Maheu — Thu, 23 Feb 2017 02:08:00 GMT

Hello,

Most likely there is an issue with the authentication piece of the SNMPv3 config. Make sure that the correct type (MD5/SHA) and password is being used.

You can try removing and adding your 'configure snmpv3 add user' line back into the config. Also check the 'configure snmpv3 add access' for the correct sec-level,

RE: Slot-1: Login failed through SNMPv3 - wrong digest

M_Nees — Thu, 23 Feb 2017 02:08:00 GMT

Hi Bob,

i opened a case in October 2016 - 01254530 (and this case is still open).

If you want to support me, have a look.

Thanks.

Regards