topic RE: summitX-21.1.1.4-patch1-5.xos automatic disable all_cast flood in ExtremeSwitching (EXOS/Switch Engine)

summitX-21.1.1.4-patch1-5.xos automatic disable all_cast flood

Stefano_Fornaci — Tue, 16 Aug 2016 20:37:00 GMT

Hi,

when I'm configuring rate limit on a port, xos automatically disable all_cast on that port. I've to manually re-enable it with:

enable flooding all_cast ports 1

It seems patch1-2 known issue

Regards

RE: summitX-21.1.1.4-patch1-5.xos automatic disable all_cast flood

Karthik_Mohando — Wed, 17 Aug 2016 10:48:00 GMT

Hi Stefano,

Welcome to the Hub...

Do you see this issue only in 21.1.1.4 patch 1-2 or also in patch 1-5 ?

RE: summitX-21.1.1.4-patch1-5.xos automatic disable all_cast flood

Stefano_Fornaci — Wed, 17 Aug 2016 11:51:00 GMT

Hi Karthik,

thank you!

I see this issue also in patch 1-5

RE: summitX-21.1.1.4-patch1-5.xos automatic disable all_cast flood

Ron_Huygens — Wed, 17 Aug 2016 12:01:00 GMT

Please look at this article:
https://gtacknowledge.extremenetworks.com/articles/Solution/Traffic-is-filtered-by-the-switch-with-d..

After the command; "enable flooding all_cast ports all" it should not re-occur.

RE: summitX-21.1.1.4-patch1-5.xos automatic disable all_cast flood

Stefano_Fornaci — Wed, 17 Aug 2016 12:11:00 GMT

Yes I confirm that it not re-occur. I only want to inform that in patch 1-5 with default config flooding all_cast is enable as article says, but if you configure rate flood limit for the first time it will "disable flooding all_cast ports all".

RE: summitX-21.1.1.4-patch1-5.xos automatic disable all_cast flood

Ron_Huygens — Wed, 17 Aug 2016 15:59:00 GMT

I will check this with development.