https://community.extremenetworks.com/t5/extremeswitching-exos-switch/snmp-transceiver-information/m-p/45947#M11565 Please check the chapter # <B>52 Supported Standards, Protocols,and MIBs</B> from EXOS concept guide and see if it is mention there.<BR /> <BR /> If not then it is not being supported by EXOS. Wed, 25 Jun 2014 05:35:00 GMT Sumit_Tokle 2014-06-25T05:35:00Z https://community.extremenetworks.com/t5/extremeswitching-exos-switch/snmp-transceiver-information/m-p/45946#M11564 Hello Community,<BR /> <BR /> I would like to know if there's possible to get an information output about transceiver DDM ports.<BR /> <BR /> Like command below, I want to get those information, is there possible?<BR /> <BR /> Port Temp TxPower RxPower TxBiasCurrent Voltage-Aux1/ Voltage-Aux2 (Celsius) (dBm) (dBm) (mA) Vcc (Volts) (Volts)<BR /> ================================================================================<BR /> 1 37.81 2.64 -8.02 35.96 3.28 N/A<BR /> Wed, 25 Jun 2014 04:07:00 GMT https://community.extremenetworks.com/t5/extremeswitching-exos-switch/snmp-transceiver-information/m-p/45946#M11564 julian3 2014-06-25T04:07:00Z https://community.extremenetworks.com/t5/extremeswitching-exos-switch/snmp-transceiver-information/m-p/45947#M11565 Please check the chapter # <B>52 Supported Standards, Protocols,and MIBs</B> from EXOS concept guide and see if it is mention there.<BR /> <BR /> If not then it is not being supported by EXOS. Wed, 25 Jun 2014 05:35:00 GMT https://community.extremenetworks.com/t5/extremeswitching-exos-switch/snmp-transceiver-information/m-p/45947#M11565 Sumit_Tokle 2014-06-25T05:35:00Z