topic RE: compatibility with OEM SFP in ExtremeSwitching (EXOS/Switch Engine)

compatibility with OEM SFP

Artyom_Denisov — Tue, 26 May 2015 15:51:00 GMT

I have some X8 and X670 switches with installed SR and LR transievers
Media Type : SF+_SR
Vendor Name : OPNEXT, INC.
Part Number : TRS2001EN-0006
Serial Number : 1334A-17101
Wavelength : 850 nm

Media Type : SF+_LR
Vendor Name : SumitomoElectric
Part Number : SPP5300LR-EN1
Serial Number : 1412L-40020
Wavelength : 1310 nm

Where i can find a compatibility matrix with that OEM SFP transceivers or any certification document?So we have problems with that transceivers, which one cause to hang up internal bus, and DOM information can not be readed.

RE: compatibility with OEM SFP

BrandonC — Tue, 26 May 2015 19:04:00 GMT

Hi Artyom,

You can find which optics are supported on which platform in the EXOS Hardware/Software Compatibility Guide.

More detailed information on these optics is available in the Pluggable Hardware Installation Guide.

-Brandon

RE: compatibility with OEM SFP

Artyom_Denisov — Tue, 26 May 2015 19:04:00 GMT

Thank you for this links, but i not found there any information about OPNEXT or SumitomoElectric or other vendors of optics that are compatible/certified to use with Extreme swicthes.

RE: compatibility with OEM SFP

BrandonC — Tue, 26 May 2015 19:04:00 GMT

As far as I know, there is not a customer-facing document with information regarding the manufacturers of OEM optics.

Both of the optics listed above are Extreme certified and should be supported in the X670 and X8, so if you are experiencing issues with these optics, I would suggest opening a case with GTAC.

-Brandon