topic Edit SNMP config in ExtremeSwitching (EXOS/Switch Engine)

Edit SNMP config

Daniel_Valera1 — Fri, 20 May 2016 01:34:00 GMT

Hi! i need edit snmp config at the sw.

I have this configuration
"configure snmp access-profile snmp_access1 readwrite" and want chenge to readonly:

"configure snmp access-profile snmp_access1 readonly" but i see a CLI error:

Error: Please remove previously configured rule(s) before configuring policy snmp_access1

How remove previously configured rule?

Regards

RE: Edit SNMP config

Henrique — Fri, 20 May 2016 01:45:00 GMT

Hi Daniel, to change from RW to RO you have to follow the steps below:

config snmp access-profile none
config snmp access-profile snmp_access1 readonly

RE: Edit SNMP config

Ronald_Dvorak — Fri, 20 May 2016 01:45:00 GMT

XOS command guide -->
http://documentation.extremenetworks.com/exos_commands/EXOS_21_1/EXOS_Commands_All/r_configure-snmp-...

RE: Edit SNMP config

Daniel_Valera1 — Fri, 20 May 2016 01:45:00 GMT

Thanks bro...