topic RE: Will 10G SFP+ (model 10301) work in a x440-G2-24p-10GE4? Getting error when inserting. in ExtremeSwitching (EXOS/Switch Engine)

Will 10G SFP+ (model 10301) work in a x440-G2-24p-10GE4? Getting error when inserting.

Robert_LeClerc — Fri, 26 Jan 2018 22:02:00 GMT

Hello and sorry for asking a possibly stupid question, quite new to Extreme switches.

We have a few new x440-G2-24p-10GE4's and 10G SFP+'s (model 10301). When I insert them into the switch I get the error below. I read reference to needing a license but each post referenced the 24t model, we have the 24p (not sure if that makes a difference). The SFP's will be used for uplink.

The SF+_SR optic module is not compatible with SFP ports - please remove it from port 24.

Thank you for any assistance!

RE: Will 10G SFP+ (model 10301) work in a x440-G2-24p-10GE4? Getting error when inserting.

BrandonC — Fri, 26 Jan 2018 22:10:00 GMT

Port 24 on the X440-G2-24p is a 1G combo port.

The 10G capable ports on this switch are port 25-28, located on the back of the switch. You will need a 10G port speed license to allow 10G operation on these ports.

RE: Will 10G SFP+ (model 10301) work in a x440-G2-24p-10GE4? Getting error when inserting.

BrandonC — Fri, 26 Jan 2018 22:10:00 GMT

Also, I wanted to add that the optic you have will work in the rear 10G ports.

RE: Will 10G SFP+ (model 10301) work in a x440-G2-24p-10GE4? Getting error when inserting.

Ronald_Dvorak — Fri, 26 Jan 2018 22:13:00 GMT

https://documentation.extremenetworks.com/summit/summit_family_hw_install/switch_ovrvu/c_x440-g2-24p...

RE: Will 10G SFP+ (model 10301) work in a x440-G2-24p-10GE4? Getting error when inserting.

Salvador_Gallo — Fri, 26 Jan 2018 22:57:00 GMT

Check this link https://gtacknowledge.extremenetworks.com/pkb_mobile#/articles/en_US/Q_A/How-Do-I-utilize-the-10G-ports-on-a-X440-G2

RE: Will 10G SFP+ (model 10301) work in a x440-G2-24p-10GE4? Getting error when inserting.

Robert_LeClerc — Fri, 26 Jan 2018 23:00:00 GMT

Perfect, thank you both! Exactly the info I needed, just a little embarrassed that I didn't find them in my searching.