topic RE: How I can check port-up-down trap settings in Summit Ver2 Stack ? in ExtremeSwitching (EXOS/Switch Engine)

How I can check port-up-down trap settings in Summit Ver2 Stack ?

Weda — Mon, 07 Mar 2016 16:48:00 GMT

How I can check port-up-down trap settings in Summit Ver 2Stack with ExtremeXOS (Stack) version 16.1.2.14 16.1.2.14 ?

RE: How I can check port-up-down trap settings in Summit Ver2 Stack ?

Prashanth_KG — Mon, 07 Mar 2016 17:31:00 GMT

Hi Weda,

Have you tried the following command,

"show port info detail"

You can look for the setting in the output as below:

Link up/down SNMP trap filter setting: Enabled

Also, you can verify the configuration by filtering them using the following usage:

"show configuration detail | include port-up-down"

Hope this helps!
Let us know if you are looking for any other command.

RE: How I can check port-up-down trap settings in Summit Ver2 Stack ?

Henrique — Tue, 08 Mar 2016 01:39:00 GMT

Just an addition:

You can enable/disable port-up-down SNMP trap using the following command:

[enable | disable] snmp traps port-up-down ports [all | ]