https://community.extremenetworks.com/t5/extremeswitching-exos-switch/ospf-route-duration-possible-link-flapping/m-p/47942#M12445 Create Date: May 9 2012 12:10PM<BR /> <BR /> What version of XoS are you running and what platform ? <BR /> <BR /> (from Andreas_Larsen) Wed, 08 Jan 2014 06:50:00 GMT EtherNation_Use 2014-01-08T06:50:00Z https://community.extremenetworks.com/t5/extremeswitching-exos-switch/ospf-route-duration-possible-link-flapping/m-p/47941#M12444 Create Date: May 9 2012 10:06AM<BR /> <BR /> My question revolves around an OSPF intra-area route that continually has the Duration resetting to 0 after 11 minutes. Why would this be occuring? The physical link is not flapping and the OSPF inter-area route is not flapping.<BR /> <BR /> X.x.x.x and y.y.y.y replace my subnets as the specific numbers are not important<BR /> <BR /> When running the command "show iproute x.x.x.x/30" the following is the output:<BR /> <BR /> <BR /> <BR /> MDF# show iproute x.x.x.x/30 <BR /> Ori Destination Gateway Mtr Flags VLAN Duration<BR /> #oa x.x.x.x/30 y.y.y.y 16 UG-D---um--f Tran100 0d:0h:0m:2s<BR /> or x.x.x.x/30 z.z.z.z 16 UG-D---um--- Tran1 6d:0h:24m:52s<BR /> <BR /> (from Daniel_Scarberry) Wed, 08 Jan 2014 06:50:00 GMT https://community.extremenetworks.com/t5/extremeswitching-exos-switch/ospf-route-duration-possible-link-flapping/m-p/47941#M12444 EtherNation_Use 2014-01-08T06:50:00Z https://community.extremenetworks.com/t5/extremeswitching-exos-switch/ospf-route-duration-possible-link-flapping/m-p/47942#M12445 Create Date: May 9 2012 12:10PM<BR /> <BR /> What version of XoS are you running and what platform ? <BR /> <BR /> (from Andreas_Larsen) Wed, 08 Jan 2014 06:50:00 GMT https://community.extremenetworks.com/t5/extremeswitching-exos-switch/ospf-route-duration-possible-link-flapping/m-p/47942#M12445 EtherNation_Use 2014-01-08T06:50:00Z