topic RE: Hello, please tell me OID SNMPv2c to parameter show man > ssh acces. ExtremeXOS version 15.7.1.4 in ExtremeSwitching (EXOS/Switch Engine)

Hello, please tell me OID SNMPv2c to parameter show man > ssh acces. ExtremeXOS version 15.7.1.4

Артур_Беляков — Mon, 12 Dec 2016 20:35:00 GMT

Hello, please tell me OID SNMPv2c to parameter show man > ssh acces. ExtremeXOS version 15.7.1.4

RE: Hello, please tell me OID SNMPv2c to parameter show man > ssh acces. ExtremeXOS version 15.7.1.4

Henrique — Tue, 13 Dec 2016 01:05:00 GMT

Hello,

What information are you trying to get through SNMP?

If you are referring to "show management (show man)" output, there are many information displayed by that command.

Thanks.

RE: Hello, please tell me OID SNMPv2c to parameter show man > ssh acces. ExtremeXOS version 15.7.1.4

Roy_Noh — Tue, 13 Dec 2016 12:03:00 GMT

Hello,

EXOS has an OID to check whether a SSH module is installed or not but it does not indicate the enabling status of it.

extremeImageSshCapability OBJECT-TYPE SYNTAX INTEGER { unknown(0), nossh(1), ssh(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates whether image has ssh capability." ::= { extremeImageFeatureEntry 2 }
As Henrique has already mentioned, you can check it by the CLI command itself.

Thanks.

RE: Hello, please tell me OID SNMPv2c to parameter show man > ssh acces. ExtremeXOS version 15.7.1.4

Артур_Беляков — Tue, 13 Dec 2016 12:03:00 GMT

Thanks for the answers, you need to check this option:
print command sh man
SSH access : Enabled (Key valid, tcp port 22 vr all)
: Access Profile : ******
must be checked in zabbiks Access Profile .
there is a problem with reset to default SSH Access.

RE: Hello, please tell me OID SNMPv2c to parameter show man > ssh acces. ExtremeXOS version 15.7.1.4

Roy_Noh — Tue, 13 Dec 2016 12:03:00 GMT

I am not sure that I get it right but your point is that you can't remove the access profile because it's hidden. Right?

RE: Hello, please tell me OID SNMPv2c to parameter show man > ssh acces. ExtremeXOS version 15.7.1.4

Артур_Беляков — Tue, 13 Dec 2016 12:03:00 GMT

No, must be check status Access Profile.
for example: Access Profile: mgm1
I need to check that mgm1 is not changed

RE: Hello, please tell me OID SNMPv2c to parameter show man > ssh acces. ExtremeXOS version 15.7.1.4

Roy_Noh — Tue, 13 Dec 2016 12:03:00 GMT

If it's the case, I don't think you can check the name of SSH access profile by an OID.
I think you'd better to use CLI to gather the information.

Thanks.

RE: Hello, please tell me OID SNMPv2c to parameter show man > ssh acces. ExtremeXOS version 15.7.1.4

Prashanth_KG — Tue, 13 Dec 2016 14:56:00 GMT

Hi,

As Mark explained, following OID value would be providing information if the SSH2 module is installed or not.

.1.3.6.1.4.1.1916.1.1.1.35.1.2

This will not share the information if SSH access is enabled or not.
We have the CLI command, "show management" to provide this requested information.

Hope this helps!

RE: Hello, please tell me OID SNMPv2c to parameter show man > ssh acces. ExtremeXOS version 15.7.1.4

Артур_Беляков — Tue, 13 Dec 2016 14:56:00 GMT

Thanks you