https://community.extremenetworks.com/t5/extremeswitching-exos-switch/lag-with-1g-and-10g-ports/m-p/49122#M12967 I'm running EAPS-ring with 2 x 1G LAG-ports and now I need to add 10G ports to EAPS. How does traffic behaves if LAG has 1G and 10G ports?<BR /> How about is it possible to change the LAG master-port?<BR /> <BR /> I have X460 switches with XOS 15.3.1.4<BR /> Fri, 06 Nov 2015 15:04:00 GMT Tuomas_Rasku 2015-11-06T15:04:00Z https://community.extremenetworks.com/t5/extremeswitching-exos-switch/lag-with-1g-and-10g-ports/m-p/49122#M12967 I'm running EAPS-ring with 2 x 1G LAG-ports and now I need to add 10G ports to EAPS. How does traffic behaves if LAG has 1G and 10G ports?<BR /> How about is it possible to change the LAG master-port?<BR /> <BR /> I have X460 switches with XOS 15.3.1.4<BR /> Fri, 06 Nov 2015 15:04:00 GMT https://community.extremenetworks.com/t5/extremeswitching-exos-switch/lag-with-1g-and-10g-ports/m-p/49122#M12967 Tuomas_Rasku 2015-11-06T15:04:00Z https://community.extremenetworks.com/t5/extremeswitching-exos-switch/lag-with-1g-and-10g-ports/m-p/49123#M12968 Hello, Tuomas!<BR /> <BR /> All ports in a LAG must be running at the same speed and duplex setting. Each port canbelong to only one LAG.<BR /> <BR /> Thank you! Fri, 06 Nov 2015 15:08:00 GMT https://community.extremenetworks.com/t5/extremeswitching-exos-switch/lag-with-1g-and-10g-ports/m-p/49123#M12968 Alexandr_P 2015-11-06T15:08:00Z https://community.extremenetworks.com/t5/extremeswitching-exos-switch/lag-with-1g-and-10g-ports/m-p/49124#M12969 A LAG cannot consist out of ports with different speeds. You cannot add a 10 Gig port to a 1 gig lag. <BR /> <BR /> Fri, 06 Nov 2015 15:08:00 GMT https://community.extremenetworks.com/t5/extremeswitching-exos-switch/lag-with-1g-and-10g-ports/m-p/49124#M12969 OscarK 2015-11-06T15:08:00Z https://community.extremenetworks.com/t5/extremeswitching-exos-switch/lag-with-1g-and-10g-ports/m-p/49125#M12970 Tuomas, <BR /> <BR /> to change your eaps link without downtime, <BR /> open the ring in the eaps on the link you ant to change (unplug or disable the port), <BR /> take care, the secondary port forward the traffic, <BR /> cange the configuration of the eaps and the vlan on both the device intrested by the link, <BR /> an plug again the new 10G link, and check the convergence of the eaps.<BR /> <BR /> Easy and safe <span class="lia-unicode-emoji" title=":winking_face:">😉</span><BR /> <BR /> Roberto<BR /> <BR /> Fri, 06 Nov 2015 15:15:00 GMT https://community.extremenetworks.com/t5/extremeswitching-exos-switch/lag-with-1g-and-10g-ports/m-p/49125#M12970 _up__bb_ 2015-11-06T15:15:00Z