x690 40Gbe and 100Gbe ports

Andre_Brits_Kan — Tue, 02 Oct 2018 16:33:00 GMT

I have a pair of x690 switches.
The last 6 ports is configured with the following template:
configure ports partition-template 2x100G-and-4x40G

I want to use the 40Gbe DAC fan out to four 10Gbe SFP+ ports on the four 40Gbe ports.

I configure port 49 and 53 (40Gbe ports) with the following commands:
configure ports 49 partition 4x10G
configure ports 53 partition 4x10G

I configure port 57 and 61 (100Gbe ports with 40Gbe template applied) with the following commands:
configure ports 57 partition 4x10G
configure ports 61 partition 4x10G

The question I have is will the standard QSFP+ - 4xSFP+ fan-out cbl, 3m (Part Code 10321) work in port 57 and 61? These ports are 10Gb/ 25Gb/ 40Gb/ 50Gb/ 100Gb QSFP28 ports

Thx

RE: x690 40Gbe and 100Gbe ports

FibDbe — Mon, 01 Mar 2021 19:06:00 GMT

< I know this is an old case >

We have had great success with using re-partitioning templates with fan-out cables.

topic RE: x690 40Gbe and 100Gbe ports in ExtremeSwitching (EXOS/Switch Engine)

x690 40Gbe and 100Gbe ports

RE: x690 40Gbe and 100Gbe ports