topic RE: Export OSPF Cost 0 in EXOS 22.4.1 in ExtremeSwitching (EXOS/Switch Engine)

Export OSPF Cost 0 in EXOS 22.4.1

Stephen_Elliot1 — Wed, 11 Jul 2018 14:49:00 GMT

Hi,

Why can I no longer export static routes into OSPF with a cost of 0 in EXOS 22.4.1?
I need to be able to export the actual cost of the route as configured in the iproute command.

Router-1 # enable ospf export static cost
cost value [0,1-65535] <<<<<<<<<<< Implies I can still use 0

Router-1 # enable ospf export static cost 0
^
%% Invalid input detected at '^' marker.
%% Input number must be in the range [1, 65535]. <<<<<<<<<<<<< FAIL!

Cheers.

RE: Export OSPF Cost 0 in EXOS 22.4.1

Drew_C — Mon, 30 Jul 2018 23:59:00 GMT

Hi Stephen,
If you haven't already, it sounds a case should be opened so GTAC can send it to engineering for review.
How to contact Extreme Networks Global Technical Assistance Center (GTAC)

RE: Export OSPF Cost 0 in EXOS 22.4.1

Stephen_Elliot1 — Tue, 31 Jul 2018 12:46:00 GMT

Thanks Drew, some of the Extreme support team used to frequent these forums, so I was hoping for a bit of input from them before raising a case via our reseller.

RE: Export OSPF Cost 0 in EXOS 22.4.1

Stephen_Elliot1 — Wed, 22 Aug 2018 17:50:00 GMT

If anyone's interested this appears to be fixed in EXOS 22.5.