https://community.extremenetworks.com/t5/extremeswitching-exos-switch/dual-hash-recursion-level-value-set-to-100/m-p/49902#M13306 In what might be a long thread about our multi-casting situation....my first question is when I do sho for con why does our value show 100 when the only configurable options are 0-3?<BR /> <BR /> sh for con<BR /> <BR /> L2 and L3 Forwarding table hash algorithm:<BR /> Configured hash algorithm: crc32<BR /> Current hash algorithm: crc32<BR /> <BR /> L3 Dual-Hash configuration: (Applies to X460, X480, X650 and X670 only)<BR /> Configured setting: on<BR /> Current setting: on<BR /> Dual-Hash Recursion Level: <B>100</B><BR /> <BR /> Hash criteria for IP unicast traffic for L2 load sharing and ECMP route sharing<BR /> Sharing criteria: L3_L4<BR /> <BR /> IP multicast:<BR /> Group Table Compression: on<BR /> <BR /> External lookup tables:<BR /> Configured Setting: l2-and-l3<BR /> Current Setting: l2-and-l3<BR /> <BR /> Switch Settings:<BR /> Switching mode: store-and-forward<BR /> <BR /> # configure forwarding hash-recursion-level<BR /> <MAX_LEVEL> Set maximum number of L3 hash buckets to modify to make room for new entry. (0-3, default 1)<BR /> <BR /> Using X450a-24x (Stack) w/XOS 15.2.3.2<BR /> <BR /></MAX_LEVEL> Wed, 07 Dec 2016 12:32:00 GMT Jimmy2 2016-12-07T12:32:00Z https://community.extremenetworks.com/t5/extremeswitching-exos-switch/dual-hash-recursion-level-value-set-to-100/m-p/49902#M13306 In what might be a long thread about our multi-casting situation....my first question is when I do sho for con why does our value show 100 when the only configurable options are 0-3?<BR /> <BR /> sh for con<BR /> <BR /> L2 and L3 Forwarding table hash algorithm:<BR /> Configured hash algorithm: crc32<BR /> Current hash algorithm: crc32<BR /> <BR /> L3 Dual-Hash configuration: (Applies to X460, X480, X650 and X670 only)<BR /> Configured setting: on<BR /> Current setting: on<BR /> Dual-Hash Recursion Level: <B>100</B><BR /> <BR /> Hash criteria for IP unicast traffic for L2 load sharing and ECMP route sharing<BR /> Sharing criteria: L3_L4<BR /> <BR /> IP multicast:<BR /> Group Table Compression: on<BR /> <BR /> External lookup tables:<BR /> Configured Setting: l2-and-l3<BR /> Current Setting: l2-and-l3<BR /> <BR /> Switch Settings:<BR /> Switching mode: store-and-forward<BR /> <BR /> # configure forwarding hash-recursion-level<BR /> <MAX_LEVEL> Set maximum number of L3 hash buckets to modify to make room for new entry. (0-3, default 1)<BR /> <BR /> Using X450a-24x (Stack) w/XOS 15.2.3.2<BR /> <BR /></MAX_LEVEL> Wed, 07 Dec 2016 12:32:00 GMT https://community.extremenetworks.com/t5/extremeswitching-exos-switch/dual-hash-recursion-level-value-set-to-100/m-p/49902#M13306 Jimmy2 2016-12-07T12:32:00Z https://community.extremenetworks.com/t5/extremeswitching-exos-switch/dual-hash-recursion-level-value-set-to-100/m-p/49903#M13307 I think because the X450a does not support dual hash.<BR /> (Applies to X460, X480, X650 and X670 only)<BR /> <BR /> So the number shown there is not important as it is not supported at all on that platform. Wed, 07 Dec 2016 14:29:00 GMT https://community.extremenetworks.com/t5/extremeswitching-exos-switch/dual-hash-recursion-level-value-set-to-100/m-p/49903#M13307 OscarK 2016-12-07T14:29:00Z