topic RE: Extreme XOS STP setup with existing Enterasys network in ExtremeSwitching (EXOS/Switch Engine)

Extreme XOS STP setup with existing Enterasys network

Jeremy_Gibbs — Wed, 06 Jan 2016 23:01:00 GMT

When I loop a switch, I want the port to go down and stay down. This doesn't work in 16.1.2.14-patch1. The port comes back up and loops the network after a few seconds. These x460G2's are integrating with an existing Enterasys network with one MSTI.

RE: Extreme XOS STP setup with existing Enterasys network

JohanHendrikx — Wed, 06 Jan 2016 23:07:00 GMT

I use the config:

configure elrp-client periodic ports all interval 1 log-and-trap disable-port permanent

This works

RE: Extreme XOS STP setup with existing Enterasys network

Jeremy_Gibbs — Wed, 06 Jan 2016 23:08:00 GMT

I would love to use ELRP, but we are going to be using policy. When you use policy, ELRP no longer functions. That is apparently by design, or so I have been told.

RE: Extreme XOS STP setup with existing Enterasys network

Tom_Currier — Thu, 07 Jan 2016 01:56:00 GMT

Jeremy;

The GTAC is investigating this and will respond directly. We will create a case in your name for tracking.

Tom Currier